System Name Programming; Voice Message Library - Ness D8xD Installer Manual

P198e
Available in D8x/D16x V8 and later.
ProgrAm moDe leVel
Installer mode or NessComms V5.3
or later.
FACtory DeFAUlt
11e on
notes
Only one option can be on. Turning
an option on turns off another.

VoiCe messAge librAry

D8x/D16x version 8.0 audible alarm messages and voice prompts for remote phone operation are drawn from this built-in library of
pre-recorded voice messages.
DeSCRIPTION VOICe MeSSAGe
AlARM MeSSAGeS
ZONe 1 to ZONe 16 Zone 1 alarm ... Zone 16 alarm.
Duress Duress eMeRGeNCy.
Keyswitch Panic Keyswitch panic emergency.
Keypad Panic Keypad panic emergency.
Radio Panic Radio panic emergency.
Medical alarm Medical eMeRGeNCy.
Fire alarm Fire eMeRGeNCy.
exit installer exit installer WARNING.
external Tamper external tamper warning.
Internal Tamper Security system Main Tamper WARNING.
Keypad Tamper Keypad tamper warning.
Radio Tamper Radio detector Tamper WARNING.
Mains Fail Mains power Fail WARNING.
Panel Bat Fail Security system main Battery Fail WARNING.
RADIO Bat Fail Radio battery fail warning.
RADIO Super Fail RADIO detector Supervision Fail WARNING.
AlARM INTRO This is a security system report. To start the report
press 1.
AlARM lOCATION Security SySTeM reports the following:
AlARM CONClUSION end of messages.
To control the security system press 2, then after the
tone, press 2 again.
To acknowledge and end, press STAR, then press
HASH, and then hang up the phone.
TelePHONe ReMOTe CONTROl MeSSAGeS
ReMOTe CONTROl This is your SeCURITy SySTeM.
ANSWeR INTRO
ReMOTe CONTROl Please try again. Press STAR, then enter your USeR
entry Fail code, then PReSS HASH.
CONTROl INTRO To arm or disarm the security system press 1.
To control OUTPUTS press 2.
To exclude or include a zone press 3.
To listen to reports press 4.
To hang up, press STAR then press HASH.
ARM & DISARM INTRO To arm, press 1.
To disarm, press 2.
To return, press STAR
ARMeD 1 Area 1 armed
ARMeD 2 Area 2 armed
DISARMeD 1 Area 1 disarmed
DISARMeD 2 Area 2 disarmed
84
system nAme
Assign a name to the control panel to identify the system during an audible alarm message.
you can program a name from the choice below.
TO PROGRAM
1. Press P198e
2. Press 1e-11e to turn an option ON.
1E "Home"
2E "Office"
3E "Work"
4E "Family 1"
5E "Family 2"
6E "Family 3"
7E "System 1"
8E "System 2"
9E "System 3"
10E "Ness Security System"
11E "Ness Corporation"
NeSS D8X / D16X DelUXe CONTROl PANel – INSTAllATION MANUAl
DeSCRIPTION VOICe MeSSAGe
CONTROl OUTPUTS Double press the selected auxiliary output 1 to 8.
INTRO
Then press STAR to activate or HASH to turn off the
selected output.
Press STAR to return.
AUX 1 ON Auxiliary 1 ON.
AUX 2 ON Auxiliary 2 ON.
AUX 3 ON Auxiliary 3 ON.
AUX 4 ON Auxiliary 4 ON.
AUX 5 ON Auxiliary 5 ON.
AUX 6 ON Auxiliary 6 ON.
AUX 7 ON Auxiliary 7 ON.
AUX 8 ON Auxiliary 8 ON.
AUX 1 OFF Auxiliary 1 OFF.
AUX 2 OFF Auxiliary 2 OFF.
AUX 3 OFF Auxiliary 3 OFF.
AUX 4 OFF Auxiliary 4 OFF.
AUX 5 OFF Auxiliary 5 OFF.
AUX 6 OFF Auxiliary 6 OFF.
AUX 7 OFF Auxiliary 7 OFF.
AUX 8 OFF Auxiliary 8 OFF.
eXClUDe AlARMS To TOGGle the zone eXClUSION, enter the zone
INTRO number, then press HASH.
ACKNOWleDGe Wait to hear the report again, or to continue, press 1.
lISTeN TO RePORTS To listen to the zone report, press 1.
INTRO
To listen to the emergencies and warnings report,
press 2.
To listen to the AReA ARM report press 3.
To listen to the excluded zone report press four.
ZONe RePORT lIST The following zone alarms are current:
WARNING RePORT lIST The following eMeRGeNCIeS and WARNINGS are
current:
eXClUDe RePORT lIST The following zone exclusions are current:
RADIO DeVICe lOW A radio device has a low battery and needs to be
BATTeRy changed.
eXTeRNAl SIReN The external siren cover has been tampered with.
TAMPeR
PANel eNClOSURe The security system main enclosure has been
TAMPeR tampered with.
All OK All OK.
INVAlID Invalid entry.
ReTURN PROMPT To return press HASH.