Telephone Numbers; Account Numbers - Ness D8xD Installer Manual

P r o g r A m m i n g
P00e
ProgrAm moDe leVel
User, Installer mode or NessComms.
FACtory DeFAUlt
No telephone numbers.
notes
• If the Follow Me telephone number is
disabled, all audible format calls are made
on telephone numbers 1 & 2.
relAteD oPtions
P86e 2e Contact ID format (Back to
base monitoring).
P86e 4e Audible format.
P86e 6e Contact ID + Audible Pulse.
P70e, P71e
ProgrAm moDe leVel
Installer mode or NessComms.
FACtory DeFAUlt
No telephone numbers.
notes
• If telephone number 2 is disabled, all
calls are made on telephone number 1
and the setting of P87e 1e has no effect.
• If telephone number 3 is disabled, all
test calls are made on telephone number
1&2
• Any keypress will stop the telephone
number display sequence.
relAteD oPtions
P87e 1e Alternate Primary/Secondary

telephone numbers.

P86e 1e Disable dialler (still allows
remote up/download if programmed).
38
Option No.
P00e
P70e
P71e
P80e
P81e
P72e
P73e
FolloW me telePHone nUmber
The Follow Me telephone number is only used in Audible Dialling mode. (If P86e 4e or
6e are on).
The Follow Me telephone number can be programmed in User Program Mode. If
the Follow Me number is programmed, then the primary & secondary numbers are
ignored.
if P86e 4e iS enAbleD (AUDible MoniTorinG)
In this case, if the Follow Me number is programmed, the primary & secondary
numbers are ignored.
if P86e 6e iS enAbleD (ConTACT iD + AUDible)
The telephone numbers programmed at P70e & P71e will be used to send the mesage
to the central station. The message is also repeated in audible format to the telephone
number (if any) programmed at P00e.
PROGRAMMING SeQUeNCe:
P00e existing telephone number is displayed one digit at a time
[enTer neW TelePHone no] e new telephone number is displayed one digit at a time
telePHone nUmbers 1 & 2
The panel can dial up to 2 phone numbers when an event is to be transmitted to a
central monitoring station or other location. Telephone numbers may be up to 30 digits
in length.
PROGRAMMING SeQUeNCe:
P70e existing telephone number is displayed one digit at a time
[enTer neW TelePHone no] e new telephone number is displayed one digit at a time
exAMPle: To program Telephone no.1 to be 03 1234 1234:
P 70 e 0312341234 e
to CleAr A telePHone nUmber
To clear a telephone number, enter the MeMORy key in place of the telephone number.
example, to clear a Telephone Number 1 press: P70e MeMORy e
sPeCiAl CHArACters (Applies to all telephone numbers)
If required, pauses, * (star) or # (hash) VF digits can be included in the dialling
sequence by using the keys in the table below.
sPeCiAl CHArACter
PAUSe (1.6sec)
* (Star)
# (Hash)
NeSS D8X / D16X DelUXe CONTROl PANel – INSTAllATION MANUAl
Description
FOllOW-Me TelePHONe NUMBeR - For audible dialling
TelePHONe NUMBeR 1 - PRIMARy
TelePHONe NUMBeR 2 - SeCONDARy
TelePHONe NUMBeR 3 - TeST CAllS
TelePHONe NUMBeR 4 - CAllBACK FOR UPlOAD
ACCOUNT NUMBeR 1
ACCOUNT NUMBeR 2
key entry
ARM Key
HOMe Key
eXClUDe Key
Default
0000
0000
keyPAD DisPlAy
12
10
11