Product Features - Ness D8xD Installer Manual

OPTIONAl PRODUCT
Ness iComms
Ness aComms
Ness iComms and aComms apps
for mobile control of your D8x/ 16x
control panel from home, office,
anywhere in the world using your
iPhone/iPad or Android device.
■ ARM, DISARM
■ VIeW ZONe STATUS
■ eMeRGeNCy AlARMS
■ CONTROl THe PANel OUTPUTS
(D8X/D16X V7.8+)
Requirements:
D8x/D16x V5.6 or later (V7.8 or later
to operate panel outputs).
Optional K-6002D ethernet kit
(includes 101-244 ethernet adapter &
450-246 RS232 cable).
iPhone/iPad/Smartphone not
included.
iComms and aComms are third party
apps which are endorsed by Ness
without tech support.
emergency alarms must be enabled
in the control panel to be available in
iComms and aComms.
4
What's New in D8x/D16x Deluxe (v8)
• New PCB layout
• Now with 8 AUX outputs (1-4 on relay board or 1-8 on output expander/s)
• Added modem chip, use any modem in 300baud mode
• Voice alarms and voice prompts using a preset voice message library
• Real time clock onboard
• New connector for the Serial port, now 4 pin
• New connector for the Listen-in header
• Dual 17VAC/20VDC power input
• Tamper/Prog link moved to corner of pcb for better accessibility
• Many new program options to cater for expanded AUX outputs
D8x/D16x All Features
• 8 or 16 alarm zones.
• Supports up to 3 mixed keypads (Navigator/Saturn/LCD) or 4 Navigator keypads
• 56 user codes can be programmed to operate by keypad PIN, radio key or access
card.
• Optional NeSS RADIO INTeRFACe for fully integrated wireless security.
• Programmable TWO AReA PARTITIONING can split the panel into two independent
areas plus a common area.
• ReAl TIMe ClOCK with AUTOTIMe features - auto arm/disarm, auto aux outputs,
time based user control.
• 3 Door ACCeSS CONTROlleR onboard with support for Weigand prox or fingerprint
readers.
• Supports control via INTeRNeT using Ness iComms/aComms iPhone/iPad and
Android apps and optional ethernet adapter.
• Voice alarm reports & Voice prompts for remote telephone operation.
• Home Mode allows partial arming, (eg, perimeter security overnight).
• Day Mode feature allows daytime monitoring of fire doors, coolrooms etc.
• Temporary Day Zone feature allows easy enabling/disabling of Day Mode.
• Keypad Panic and Duress feature.
• Two button arming feature.
• Fire Alarm feature with different siren tones.
• Highly flexible zone to output mapping.
• ONBOARD VIBRATION SeNSOR ANAlySeR with programmable sensitivity. Use with
Nessensor™ vibration sensors.
• MUlTIPle PROGRAMMABle eOl resistor values from 0k to 22k (2k2 resistors
supplied).
• Siren chirp and strobe flash on arming with radio key.
• Quiet chirps option on arm/disarm by radio key.
• True DyNAMIC BATTeRy TeST actively tests the battery under load every hour and
every time a keypad code is entered.
• 8 PROGRAMMABle AUXIlIARy outputs.
• eNHANCeD SeRIAl DATA input/output via RS232.
• AUTOMATIC ReSeT FUSeS.
• Programmable Reset Output lockout.
• 30 event memory from KPX and Saturn keypads. 80 event memory can be accessed
using Navigator keypad or NessComms™.
• Standard defaults to suit most applications.
• Easy programming by keypad or NessComms™ software.
• New modem chip allows common modems to be used for upload/download in
300baud mode.
• All programming data is permanently stored in a non-volatile memory.
• All inputs and outputs are heavily protected against lightning and high voltage supply
transients.
• High efficiency DC power supply.
• Optional output expander.
DIAlleR
• Full remote upload/download by PC and modem using NessComms™ software.
• View system status and arm/disarm using NessComms™.
• Remote control of outputs via telephone with voice prompts.
• Contact ID Format - Two 14 digit phone numbers plus one "follow me" number.
• Voice alarm reporting feature.
• Phone line monitoring (activates output).
• Dialler 'Listen in' option for installers.
• Auto Test calls.
• Pulse or DTMF dialling & true dial tone detection.
• Hex programmable client codes as required by some central stations.
NeSS D8X / D16X DelUXe CONTROl PANel – INSTAllATION MANUAl