Setting To Use Scan To Pc - Oki MB492dn User Manual

Setting to Use Scan to PC

Enable the Network TWAIN function so that you can use the Scan to PC function on a computer connected via a network.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
4.
Press [OK].
5.
Press [Scanner Setup].
6.
Press [TWAIN Setup].
7.
Check that [Network TWAIN] is set to [ON].
Memo
Pressing [Network TWAIN] switches between [ON] and [OFF].
8.
Press [Back] until the home screen is displayed.
84