Configuring Ldap Server; Configuring Secure Protocols - Oki MC363DN Configuration Manual

Hide thumbs Also See for MC363DN:
Table of Contents

Advertisement

C
LDAP
ONFIGURING
NOTE
For details on the LDAP server and encryption settings to be specified, refer to
your network administrator.
1.
Access the machine's web page and log in as the administrator.
2.
Select Admin Setup.
3.
Select Network > LDAP.
4.
Enter the domain name or IP address of the LDAP server in LDAP Server.
5.
Enter the port number of the LDAP server in Port Number.
6.
Specify a value for time-out to wait for the search results in Timeout.
7.
Specify a value for the maximum entry of the search results in Max. Entries.
8.
Specify a BaseDN to access the LDAP server in Search Root.
9.
Enter attribute names to be searched for as the user name in User Name.
Be sure to specify a value for Name 1.
10. Enter attribute name to be searched for as the E-mail address in Mail Address.
11. If necessary, specify a search condition in Additional Filter.
12. Select the authentication method you want in Method.
>
When you select Anonymous, user authentication using LDAP fails. You need to
select Simple, Digest-MD5 or Secure Protocol if you configure the LDAP
server for user authentication.
>
When you select Digest-MD5, you need to configure the DNS server setting.
>
When you select Secure Protocol, you need to configure the DNS server, the
secure protocol settings and complete Time Setup.
13. If you do not select Anonymous in step 12, specify the user ID and password to log
in to the LDAP server.
14. Select a value in Encryption.
15. Click Submit.
The network system reboots to enable the new settings.
C
ONFIGURING SECURE PROTOCOLS
Authentication using the Kerberos server is available when you access the LDAP server. Be
sure to complete Time Setup and DNS server settings to use the secure protocol.
1.
Access the machine's web page and log in as the administrator.
2.
Select Admin Setup.
3.
Select Network > Secure Protocol Server.
4.
Enter a realm name in Domain.
5.
Click Submit.
The network system reboots to enable the new settings.
SERVER
Advanced network settings > 69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents