Table of Contents
Advertisement
S
ETTING THE DRIVER DEVICE OPTIONS
This section explains how to ensure that your printer driver can utilize all of the hardware
features installed in your printer.
Accessories such as additional paper trays will only be usable if the printer driver on your
computer knows they are there.
In some cases the hardware configuration of your printer is automatically detected when
the driver is installed. However, it is advisable to at least check whether all of the available
hardware features are listed in the driver.
This procedure is essential if you subsequently add extra hardware features to your printer
after the drivers have been installed and set up.
Remember that if your machine is shared between users on different computers, the driver
must be adjusted on each user's machine.
W
INDOWS
1.
Access the driver's Properties window.
page
21.)
2.
Select the Device Options tab.
3.
Set the options for any devices you have installed, including the correct number of
paper trays, etc.
4.
Click OK to close the window and save your changes.
M
OS X
AC
1.
Refer to Print & Scan for printer information.
2.
Click on Option & Supplies and select Driver panel from the displayed screen.
3.
Set the option information of options installed in the printer such as the number of
trays, etc.
4.
If you click OK, the settings are saved and the screen closes.
(See "Changing the driver defaults" on
Setting the driver device options > 22
Advertisement
Table of Contents
