Copying Different Size Documents (Mixed Size) - Oki MC363 Advanced Manual

Copying Different Size Documents (Mixed Size)

You can set multiple documents having the same width but different lengths in the ADF so
that they can be copied on their respective paper sizes.
Documents can be set at the same time are as follows.
Specify the size of the larger document (size with *mark) for the document size.
• A4 and Folio*
• Letter and Legal 13*
• Letter and Legal 13.5*
• Letter and Legal 14*
• If [Mixed Size] is enabled, [Paper Feed] cannot be selected. The paper tray that matches the document is
automatically selected to feed the paper.
• [Mixed Size] is available only if [Zoom] is set to [98% (Fit To Page)] or [100%].
• You cannot set [Edge Erase] and [Mixed Size] at the same time.
• To use the mixed size function with the MP tray, press the
select [Paper Setup] > [Select Tray] > [Copy] to enable [MP tray].
• When you use the MP tray, load paper in the MP tray, and then display the [Mixed Size] menu.
This section covers an example of Legal 13 loaded in Tray 1 and Letter loaded in the MP tray.
1
Load Legal 13 paper in Tray 1, and then load Letter paper in the MP tray.
You can use only standard paper for this function.
2
Press the (SETTING) button on the operator panel.
3
Press the button to select [Paper Setup] and press the
4
Press the button to select [MP Tray] and press the
5
Check that [Paper Size] is selected, and then press the
6
Press the or button to select [Letter] and press the
(SETTING) button on the operator panel, and then
button.
button.
button.
(OK) button.
7
Press the button to go back to the standby screen.
8
Press the (COPY) button on the operator panel.
9
Set a document that is mixed with Legal 13 and Letter sizes in the ADF.
Setting in the ADF (User's Manual)
10
Press the button.
11
Press the or button to select [Mixed Size] and press the
12
Press the or button to select [ON] and press the
13
Press the button to go back to the standby screen.
14
Check that the following settings are displayed on the standby screen.
[Mixed Size]: ON
•
[Paper Feed]: Auto
•
[Zoom]: 100%
•
[Scan size]: A4 or Letter
•
15
Enter the number of copies by using the numeric keypad if necessary.
16
Press the (MONO) or
When using the Mixed Size function, be careful about the binding position of duplex documents.
When copying mixed-size duplex documents, specify the binding position for the bigger documents and bind smaller
documents in the same direction as the bigger ones. (Their binding positions may not be the same.)
• For Legal/Letter
- For Legal documents with long-edge binding, set Letter documents with long-edge binding. (When loading in the
ADF, set the documents so that their binding positions align to the top or bottom of the ADF.)
- For Legal documents with short-edge binding, set Letter documents with short-edge binding. (When loading in the
ADF, set the documents so that their binding positions align to the left or right of the ADF.)
- 31 -
(OK) button.
(COLOR) button.
2. Copy
button.