Setting Fax Detection Mode - Oki MB492dn User Manual

Setting Fax Detection Mode

Set the machine so that it can determine whether the sender is sending a fax while the recipient is holding the handset of the external
telephone after picking it up to answer the call when the telephone rings in Tel/Fax Ready mode.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
4.
Press [OK].
5.
Press [Fax Setup].
6.
Press [Fax Setting].
7.
Press [CNG Detection].
[CNG Detection] is set to [ON].
Memo
Pressing [CNG Detection] switches between [ON] and [OFF].
[ON]: The machine detects fax beep signals, and then automatically starts receiving a fax.
[OFF]: If the sender is sending a fax, the machine receives a fax with manual reception.
8.
Press [Back] until the home screen is displayed.
386