Front Brake Pads; Pad Removal - Polaris 2012 RANGER RZR 570 INTL Service Manual

FRONT BRAKE PADS

Pad Removal

1. Elevate and support front of vehicle.
CAUTION
Use care when supporting vehicle so that it
does not tip or fall.
Severe injury may occur if machine tips or falls.
2. Remove the front wheel.
3. Loosen the pad adjuster screw 2-3 turns.
4. Remove and disca rd the upp er and lower calip er
mounting bolts and remove the caliper from the front
hub.
NOTE: When remo ving c aliper, us e c are not to
damage brake line . Supp ort c aliper so t o avo id
kinking or bending brake line.
5. Push caliper pis ton in to caliper bore slowly using a
C-clamp or locking pliers with pads installed.
NOTE: Brake fluid will be
compensating p ort in to ma ster c ylinder
reservoir whe n pist on is p ushed ba ck into c aliper.
Remove excess fluid from reservoir as required.
6. Push the mounting bracket inward and the slip outer
7. Remove the inner pad from the bracket and caliper.
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
brake pad out between the bracket and caliper body.
BRAKES
fo rced t hrough
fluid
9
9.13