Polaris 2012 RANGER RZR 570 INTL Service Manual page 222

Table of Contents

Advertisement

CLUTCHING
6. Remove the (8) clutch cover screws and remove the
outer clutch cover from the vehicle.
7. Mark the drive belt direction of rotation and remove
drive belt (see "DRIVE BELT - Belt Removal").
8. Remove the d riven clutch r etaining b olt and dri ven
clutch.
9. Install the Drive Clutch Holder PN 9314177.
10. Remove the dr ive clutch r etaining b olt an d r emove
drive clutch using the Drive Clutch Puller PA-48595.
Drive Clutch Puller PA-48595
Drive Clutch Holder 9314177
IMPORTANT: Be sure to use the correct Drive Clutch
Puller (PA- 48595) to prevent damage to crankshaft.
6.6
A
B
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
11. Loosen hose clamp attaching the PVT inlet duct to the
inner c lutch co ver. D isengage ho se fr om t he in ner
clutch cover.
12. Loosen the hose clamp (A) that attach the clutch o utlet
duct to th e inn er clutch cover . Diseng age th e ho se
from the cover.
13. Remove the (8) bolts that retain the inner clutch cover
to the engine and transmission. Remove inner clutch
cover. Make note of ca ble and hose routings for
assembly.
A A

Advertisement

Table of Contents
loading

Table of Contents