BRAKES
Caliper Installation
1. Install the parking brake caliper over the brake disc.
Align the cali per mounting sleeves with the h oles in
the mount bracket.
2. Install and tighten the two caliper mount / shift cable
bracket fasteners to specification.
Parking Brake Caliper - Mount Bracket Bolts:
37 ft. lbs. (50 Nm)
3. Install the cable, pin and clip pin. Test the park brake
for proper function.
9.12
Mount
Bracket
= T
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
PARKING BRAKE DISC (INTL MODEL)
Disc Inspection
1. Measure the brake d isc with a microm eter. If th e
thickness o f th e d isc is l ess than specified, r eplace
the brake disc (see "Disc Replacement").
Disc Replacement
1. Remove the parking brake caliper from the disc (see
"Caliper Removal").
2. Using a 1/2" socket an d ra tchet, re move the bra ke
disc retaining bolt and flat washer.
3. Remove the disc from the transmission shaft.
4. Install the n ew b rake disc. Install the m ounting b olt
and flat wa sher. Tor que th e mou nting bo lt to
specification.
Disc
Parking Brake Disc Mounting Bolt:
18-22 ft. lbs. (24-30 Nm)
Service Limit:
.150" (3.81 mm)
Bolt
Washer
= T