CLUTCHING
Clutch Assembly
1. Install th e in ner spr ing retainer if removed. Do not
apply oil or grease to the bearings.
2. Align th e " X" ma rks on e ach of the she aves du ring
reassembly.
Assemble Sheaves
3. Install the spring into the inner retainer.
4. Install the spacer over the shaft.
6.24
5. Install the outer retainer on top of the spring.
6. Place the clutch into the Universal Clutch Compressor
Tool PN PU-50518 . Apply a nd hold do wnward
pressure on the outer spring retainer. Carefully install
the snap ring.
7. Compress the outer retainer and install the snap ring.
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
Snap Ring