Polaris 2012 RANGER RZR 570 INTL Service Manual page 116

ENGINE / COOLING SYSTEM
7. Carefully insta ll the camshaf
camshafts.
8. Install the upper cam chain guide and the (8) bolts that
retain the camshaft carrier. Tighten the bolts evenly
until snug. Do not torque at this time.
9. Install th e Cylind er Holding an d Ca mshaft Timing
Plate (PU-50563) into the end of camshafts as shown.
PU-50563
3.64
t ca rrier onto the 10. Verify cam timing is correct and the piston is a TDC.
11. If timing marks are not aligned:
12. Remove the Cylin der Ho lding & Camsha ft Timin g
13. If needed, install the camshaft carrier and bolts.
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
• Remove the Camshaft Timing Plate (PU-50563)
from the end of the camshafts.
• Remove the cam carrier bolt and cam carrier.
• Correct the camshaft timing as needed.
• Reinstall the cam carrier.
• Re-check cam timing.
Plate (PU-50563) from the end of the camshafts.