Transmission Assembly - Polaris 2012 RANGER RZR 570 INTL Service Manual

TRANSMISSION
16. Torque the locking screw to specification.
8-10 ft. lbs.
(11-14 Nm)
Snorkel Locking Screw:
8-10 ft. lbs. (11-14 Nm)
8.38
= T
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.

Transmission Assembly

IMPORTANT: The snorkel shaft and pinion shaft must
be inst alled p rior to tra nsmission as sembly. Th e
snorkel shaft cannot be installed after assembling the
transmission.
1. Clean both tra nsmission case ha lves thor oughly.
Inspect case half mating surfaces for damage.
2. Install shift for k ( S) and torsion sp ring i nto
transmission housing as an assembly. Load spring as
shown in image below
3. Apply Loctite 242 to (2) screws (T) and install with
® ™
retaining plates over shift fo rk. Torque to specification.
S
Shift Fork Screws:
7-10 ft. lbs. (10-14 Nm)
4. Slide engagement dog (U) onto retaining pins of shift
fork.
U
T
= T