Switches / Controls; Ignition Key Switch / Headlamp Switch; Ignition Key Switch (Intl) - Polaris 2012 RANGER RZR 570 INTL Service Manual

ELECTRICAL

SWITCHES / CONTROLS

Ignition Key Switch / Headlamp Switch

1. Disconnect th e ke y switch ha rness by lifting the
connector lock and pulling on the c onnector. Do not
pull on the wiring.
2. Test between the 4 sets of outputs (OFF / ON L IGHTS
/ ON / START). If any of the tests fail, replace ignition
switch assembly.
• Move the switch "ON LIGHTS". There should be
continuity between pins A and E; C and D.
• Turn the ignition key to ON. There should be
continuity between switch pins C and D; E and F.
• Turn the ignition key to START. There should be
continuity between switch pins A and B; C and D;
E and F.
10.4

Ignition Key Switch (INTL)

1. Disconnect the key switc h harness by
connector lock and pulling on the connector. Do not
pull on the wiring.
2. Test between the 4 sets of outputs (OFF / ON LIGHTS
/ ON / START). If any of the tests fail, replace ignition
switch assembly.
• Turn the ignition key to ON LIGHTS. There should
• Turn the ign ition key to ON. The re should be
• Turn the ignition key to START. Th ere sh ould b e
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
be continuity between swit ch pins A, E and F; C
and D.
continuity between pins C and D; E and F.
continuity between pins A a nd B; C and D; E and
F.
lifting the