Polaris 2012 RANGER RZR 570 INTL Service Manual page 305

9. Apply a continuous b ead o f Crankcase 3 Bo nd
Sealant (PN 2871557) to the left hand transmission
mating surface.
10. Install the tra nsmission ca se cover an d r etaining
bolts. Torque bolts to specification.
Transmission Case Bolts:
15-20 ft. lbs. (20-27 Nm)
= T
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
11. Install new seals into the transmission case halves.
• The snorkel shaf t se al ( F), sho uld be pr essed in
until it seats against the housing counter-bore.
• The input shaft seal (G), should be pressed in until
it seats flush with the housing.
• The r ear ou tput sh aft se als (H), ca n be inst alled
using a st andard b ushing inst allation too l. Se als
should b e inst alled j ust p ast the
chamfer (.070 in. or 1.8 mm from the outer face of
the bore).
H
12. Thoroughly clean the shift shaft housing. Be sure the
transmission is in High gear prior to reassembly.
TRANSMISSION
case lea d-in
H
G
F
8.23
8