Polaris 2012 RANGER RZR 570 INTL Service Manual page 321

5. Assemble the reverse shaft assembly and input shaft
assembly if pr eviously
illustrations).
disassembled (see
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
6. Install the idle r gear shaft assemb ly (A) an d gear
cluster assembly (B) into the transmission housing, all
at the same time.
A
B
7. Install th e rear o utput s haft as sembly (C). R otate
output shaft assembly to align slots with engagement
dog. Ensure bearing is fully seated upon assembly.
8. Assemble shift shaft rail if previously disassembled.
Pins should offset to the same side
NOTE: Both s hift fo rks nee d t o be orien tated the
same way, so that the shift fork pins are both offset
to the same side of the rail.
TRANSMISSION
C
8.39
8