Head Lights; Headlight Adjustment; Headlamp Bulb Replacement - Polaris 2012 RANGER RZR 570 INTL Service Manual

ELECTRICAL

HEAD LIGHTS

Headlight Adjustment

The headlight beam is adjustable.
1. Place the vehicle on a level surface with the headlight
approximately 25 ft. (7.6 m) from a wall.
2. Measure the distance from the floor to the center of
the headlight and make a mark on the wall at the same
height.
3. With the machine in Park, start the engine and turn the
headlight switch to on.
4. The most intense part of the headlight beam should
be aimed 8 in. (20 cm) below the mark placed on the
wall in Step 2.
NOTE: Rider weight mu st be in cluded in the s eat
while performing this procedure.
5. Adjust the beam to the desired position by loosening
the adjustment screw (A) and moving the lamp to the
appropriate height.
A
6. Adjust th e b eam to de sired po sition. Repe at the
procedure to adjust the other headlight.
10.18

Headlamp Bulb Replacement

1. Disconnect the wire harness from the headlamp bulb.
Be sure to pull on the connector, not on the wiring.
2. Turn the bulb counterclockwise to remove it.
3. Insert new bulb. Reinsta ll the wire harness onto the
headlamp assembly.
NOTE: Make s ure the t abs on t he bulb loc ate
properly in the housing.
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
WARNING
Due to the nature of light utility vehicles and
where they are operated, headlight lenses
become dirty. Frequent washing is necessary to
maintain lighting quality. Riding with poor
lighting can result in severe injury or death.
Image for Reference Only
Image for Reference Only