Polaris 2012 RANGER RZR 570 INTL Service Manual page 82

ENGINE / COOLING SYSTEM
25. Remove the (3 ) he x bolts (K) secur ing th e exha ust
head pipe to the eng ine. Remo ve th e (3 ) r ubber
exhaust hangers (L) securing the exhaust system to
the main frame. Discard the exhaust seal and replace
with new for reassembly.
L
26. Maneuver the exhaust system towards the right-hand
side of the vehicle to gain engine removal clearance.
Removal of the exhaust system from the chassis is n ot
needed.
27. Place a s upport in -between th e main fra me and
transmission case. Do not pinch brake line.
28. Use an overhead or portable engine hoist and suitable
engine s traps t o s ecure the engine in its cu rrent
position.
29. Remove the (4) bolts and nuts (M) securing the engine
to the front motor mount bracket.
3.30
L
Discard
K
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
30. Remove the ( 8) b olts (N) securing th e cou pler
brackets to the engine and transmission.
31. Loosen the (2) bolts and nuts (O) so the e ngine mount
bracket can be slightly tilted away from engine.
N
32. With the h elp of an assista nt an d the en gine ho ist,
raise the engine vertically out of the vehicle frame.
NOTE: Have a n ass istant help guide t he e ngine in
and out of the vehicle while using an engine hoist to
prevent per sonal injury or dama ge t o th e ve hicle
components.
33. Install the engine stand adapter (PU-50824) onto the
engine PTO side mounting ears as shown below.
Bolts From The
Center Outward
PU- 50824
34. Select th e pr oper eng ine stan d slee ve ada pter an d
install it onto the engine stand adapter.
• Sleeve adapter for a 2" bore engine stand: 
(PU-50625)
• Sleeve adapter for a 2.375" bore engine stand: 
(PW-47054)
35. Place engine onto the engine stand (PU- 50624) for
service.
O
M