Belt Installation; Pvt Break-In (Drive Belt / Clutches) - Polaris 2012 RANGER RZR 570 INTL Service Manual

Belt Installation

NOTE: Be su re t o install be lt in th e s ame d irection
as it was removed.
1. Loop be lt over th e d rive clu tch an d o ver th e d riven
sheave.
2. Rotate th e dr iven clu tch a nd wa lk th e be lt into the
clutch.
3. Rotate / spin the driven clutch and belt approximately
5-7 times to properly seat the belt in the driven clutch.
4. Install the outer clutch cover and (8) screws. Torque
screws to specification.
Outer Clutch Cover Retaining Screws:
45-50 in. lbs. (5 Nm)
= T
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.

PVT Break-In (Drive Belt / Clutches)

A proper break-in of the clutches and drive belt will ensure
a longer life and better performance. Break in the clutches
and drive belt by operating at slower speeds during the 10
hour break-in p eriod as r ecommended ( see Chapter 3
"Engine Break-In Period" for break-in example). Pull only
light loads. Avoid aggressive acceleration and high speed
operation during the break-in period.
CLUTCHING
6
6.9