Engine Installation - Polaris 2012 RANGER RZR 570 INTL Service Manual

Engine Installation

Use the following pr ocedure to re install th e eng ine
assembly.
1. Attach en gine with suit able lift ing str aps t o a n
overhead or portable engine hoist.
2. Remove the engine stand adapter plate.
3. Use the ove rhead or p ortable engine ho ist a nd
suitable e ngine straps to lower the en gine in to the
vehicle frame.
NOTE: Have an a ssistant help gu ide the eng ine in
and out of the vehicle while using an engine hoist to
prevent pe rsonal injur y or dama
components.
4. By hand, install the (4) front engine mount bolts and
nuts (A). Do not tighten at this time.
5. Instal the (4) engine to transmission coupler plates (B)
and instal the ( 8) bo lts and washe rs ( C). Do no t
tighten fasteners at this time.
C
B
IMPORTANT: DO NOT torque fasteners at this time.
6. Install the Clutch Ce nter Distance To ol (PU-5 0658)
ge to vehicle
A
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
ENGINE / COOLING SYSTEM
onto th e cr ankshaft and tr ansmission in put shaft t o
properly position the clutch center distance. 

The pictures below show th e tool (PU-50658) properly
installed.
PU-50658
Drive Clutch Bolt Installed
Tool Fully Seated Inward
3
3.31