Rear Fender Flair Removal; Cargo Box Assembly Removal - Polaris 2012 RANGER RZR 570 INTL Service Manual

BODY / STEERING / SUSPENSION
Front Fender Flair Removal
1. If d ash is installed, re move th e ( 2) pu sh rive ts tha t
attach the lo wer po rtion of th e fend er flair to the
rocker panels.
2. Remove the (6) push rivets and remove fender flairs
from the dash assembly.

Rear Fender Flair Removal

1. Remove the rear bumper (see "BODY COMPONENT
REMOVAL - Rear Bumper").
2. Remove the (4) push rivets that secure the rear fender
flair and remove the fender flair from the vehicle.
5.14

Cargo Box Assembly Removal

1. Remove the seats and the engine service panel.
2. Disconnect the harness connectors at the tail lights.
3. Disengage th e tail lig ht ha rness from the r outing
features molded into the rear box on both sides.
4. Remove the cargo box access panel.
5. Remove t he (10) T -27 Torx s crews r etaining rear
bumper to the rear bumper support and storage box
(See Rear Bumper Removal).
6. Remove the (6) T-27 Torx screws (A) from the middle
of the cargo box.
7. Remove the (4) T-27 Torx Screws (B) from the front
of the cargo box.
8. Remove the (6) T-27 Torx Screws (C) from both sides
of the cargo box / rocker panels.
9. Remove the (2) push pins (D) from both sides of the
cargo box / rocker panels.
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
A
D
C
D
C
B