Pad Inspection; Pad Assembly / Installation - Polaris 2012 RANGER RZR 570 INTL Service Manual

BRAKES

Pad Inspection

1. Measure the thickness of the pad material. Replace
pads if worn beyond the service limit.
Front Brake Pad Thickness:
.300" ± .007" (7.6 mm ± .178 mm)
Service Limit: .180" (4.6 mm)
9.14

Pad Assembly / Installation

1. Lubricate mo unting bracket pin s with a light film of
silicone grease and install rubber dust boots.
2. Compress mo unting b racket and ma ke sur e dust
boots ar e fu lly se ated. In stall pads with
material facing each other.
Measure
Thickness
3. Install caliper onto front hub and torque new mounting
bolts to specification.
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
Apply Grease to Each
Bracket Pin
WARNING
If brake pads are contaminated with grease, oil,
or liquid soaked do not use the pads.
Use only new, clean pads.
Front Caliper Mount Bolt Torque:
31-34 ft. lbs. (42-46 Nm)
friction
= T