Polaris 2012 RANGER RZR 570 INTL Service Manual page 310

TRANSMISSION
13. Lift up on the shif t sh aft rail ( Q) and mo ve th e ra il
assembly rearward to allow the shift fork pins t o be
removed fr om the shif t d rum ( R). Remo ve the shift
drum (R) from the transmission housing.
14. Remove the shift shaft rail (Q) and shift forks from the
transmission housing as an assembly.
15. Remove the rear output shaft assembly (S) by lifting
underneath the gear or by tapping the shaft from the
opposite side. If use of a pr y bar is necessary, take
care not to pry on sealing surfaces of case.
8.28
16. Remove the idler gear shaft assembly (T) and gear
R
Q
17. Place the id ler gear shaft a ssembly ( T) and g ear
18. Slide engagement dog (X) off of shift fork guides.
Q
19. Remove (2) screws and retaining plates, then lift shift
S
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
cluster assembly (U) from the transmission housing
by pulling both assemblies straight up.
T
U
cluster assembly (U) o n a clean surface for inspection.
If d isassembly is r equired, refer to "Gea r Cluster
Disassembly".
fork (Y) an d torsio n spr ing o ut of tran smission
housing.
X
Y