Front Brake Pads; Pad Removal - Polaris 2013 RANGER RZR S Service Manual

BRAKES

FRONT BRAKE PADS

Pad Removal

1. Elevate and support front of vehicle.
Use care when supporting vehicle so that it
does not tip or fall.
Severe injury may occur if machine tips or falls.
2. Remove the wheel nuts, washers and front wheel.
3. Loosen the pad adjuster screw 2-3 turns.
4. Remove the upper and lower caliper mounting bolts
and remove the caliper from the front hub.
NOTE: When removing caliper, use care not to
damage brake line. Support caliper to avoid kinking
or bending brake line.
5. Push caliper piston into caliper bore slowly using a
C-clamp or locking pliers with pads installed.
NOTE: Brake fluid
compensating port into
reservoir when piston is pushed back into caliper.
Remove excess fluid from reservoir as required.
9.8
CAUTION
will be forced through
master cylinder
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
6. Push the mounting bracket inward and slip outer
brake pad out between the bracket and caliper body.
7. Remove the inner pad from the bracket and caliper.
fluid
RZR / RZR S
RZR 4