Polaris 2012 RANGER RZR 570 INTL Service Manual page 76

ENGINE / COOLING SYSTEM
6. Lubricate the new wa ter p ump oil se al w ith c lean
engine oil.
7. Use the water pump oil seal installation tool in kit
PU-50869 to fully install the new water pump oil seal
(I).
Be sure the oil seal is fully seated in cover or
severe engine damage may result
8. Use the water pump mechanical seal installation tool
in kit PU-50869 to fully install the new water pump
mechanical seal (J) until it is fully seated in the cover.
9. Install a new stator cover gasket onto the engine.
3.24
PU-50869
Item #2
I
CAUTION
PU-50869
Item #3
J
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
10. Align the water pump drive slot as shown below.
11. Align th e water p ump dr ive sh aft b lade as sh own
below.
12. Apply a small amount of crankcase sealant to the area
indicated below (A).
A
Water Pump Alignment Detail View
Crankshaft
Drive Shaft
13. If needed, install the stator cover removal handles tool
PA-49317 to the water cover bolt holes to aid in stator
cover installation.
Oil Seal
Impeller
Mechanical
Seal