Polaris Sportsman 9922242 Owner's Manual
  1. Manuals
  2. Brands
  3. Polaris Manuals
  4. Offroad Vehicle
  5. Sportsman 9922242
  6. Owner's manual

Polaris Sportsman 9922242 Owner's Manual

Polaris industries all-terrain vehicles owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Pantone 426C
Sportsman 300
Owner's Manual
for Maintenance and Safety
Read this manual carefully. It contains important safety information.
This is an adult vehicle only.
Operation is prohibited for those under 16 years of age.

Advertisement

Table of Contents
loading

Related Manuals for Polaris Sportsman 9922242

Summary of Contents for Polaris Sportsman 9922242

  • Page 1 Pantone 426C Sportsman 300 Owner's Manual for Maintenance and Safety Read this manual carefully. It contains important safety information. This is an adult vehicle only. Operation is prohibited for those under 16 years of age.
  • Page 2 WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. A card containing important ATV safety information should be attached to the owner's manual on the next page. If you cannot locate this card, or if it has been removed, please call 1-800-342- 3764 for assistance.
  • Page 3 The text is printed on 100% recycled with 40% post-consumer waste (PCW).
  • Page 4 Pantone 426c NEVER CARRY NEVER USE PASSENGERS WITH DRUGS OR ALCOHOL For your nearest Polaris dealer, call 1-800-POLARIS or visit www.polarisindustries.com Polaris Sales Inc., 2100 Hwy 55 Medina, MN 55340 Phone 1-888-704-5290 Part No. 9922242 Rev 02 Printed in USA...
  • Page 5 ® • Victory Motorcycles ® We believe Polaris sets a standard of excellence for all utility and recre- ational vehicles manufactured in the world today. Many years of experi- ence have gone into the engineering, design, and development of your Polaris vehicle, making it the finest machine we’ve ever produced.
  • Page 6 POLARIS, THE WAY OUT and SPORTSMAN are registered trademarks of Polaris Industries Inc. Copyright 2009 Polaris Sales Inc. All information contained within this publication is based on the latest product information at the time of publication. Due to constant improvements in the design and quality of production components, some minor discrep- ancies may result between the actual vehicle and the information presented in this publi- cation.

  • Page 7: Table Of Contents

    Adjustments ......105 Polaris Products..... . . 109 Troubleshooting .

  • Page 8: Introduction

    The following signal words and symbols appear throughout this manual and on your vehicle. Your safety is involved when these words and sym- bols are used. Become familiar with their meanings before reading the manual. The safety alert symbol indicates a potential personal injury hazard. WARNING A WARNING indicates a hazardous situation which, if not avoided, may result in death or serious injury.
  • Page 9 Failure to heed the warnings and safety precautions contained in this manual can result in severe injury or death. A Polaris ATV is not a toy and can be hazardous to operate. This vehicle handles differently than other vehicles, such as motorcycles and cars.

  • Page 10: Vehicle Identification Numbers

    Record your vehicle's identification numbers and key number in the spaces provided. Remove the spare key and store it in a safe place. An ignition key can be duplicated only by ordering a Polaris key blank (using your key number) and mating it with one of your existing keys.
  • Page 11 You should review this information on a regular basis. If you purchased a used Polaris ATV in the United States, you can enroll in the ATV RiderCourse for a fee. Call ATV Enrollment Express at (800) 887-2887 or visit www.atvsafety.org.
  • Page 12 Boots Helmet Wearing a helmet can prevent a severe head injury. Whenever riding a Polaris vehicle, always wear a helmet that meets or exceeds established safety standards. Approved helmets in the USA and Canada bear a U.S. Department of Transportation (DOT) label.

  • Page 13: Safety

    Eye Protection Do not depend on eyeglasses or sunglasses for eye protection. When- ever riding a Polaris vehicle, always wear shatterproof goggles or use a shatterproof helmet face shield. Polaris recommends wearing approved Personal Protective Equipment (PPE) bearing markings such as VESC 8, V-8, Z87.1, or CE.

  • Page 14: Safety Warnings

    SAFETY Safety Warnings WARNING Failure to operate the ATV properly can result in a collision, loss of control, accident or overturn, which may result in serious injury or death. Heed all safety warnings outlined in this section of the owner’s manual. See the OPERATION section of the owner’s manual for proper operating procedures.

  • Page 15: Handling Gasoline

    Safety Warnings Handling Gasoline Gasoline is highly flammable and explosive under certain conditions. • Always exercise extreme caution whenever handling gasoline. • Always refuel with the engine stopped, and outdoors or in a well ventilated area. • Do not smoke or allow open flames or sparks in or near the area where refu- eling is performed or where gasoline is stored.

  • Page 16: Protective Apparel

    SAFETY Safety Warnings Protective Apparel Riding this vehicle without wearing an approved helmet and protective eyewear increases the risk of a serious injuries in the event of an accident. Operator and passenger must always wear an approved helmet that fits properly and eye protection (goggles or face shield).

  • Page 17: Operating On Pavement

    SAFETY Safety Warnings Operating on Pavement Operating an ATV on paved surfaces (including sidewalks, paths, parking lots and driveways) may adversely affect the handling of the ATV and could result in loss of control and accident or overturn. Avoid operating the ATV on pavement. ATV tires are designed for off-road use.

  • Page 18: Physical Control Of The Atv

    SAFETY Safety Warnings Physical Control of the ATV Removing a hand from the handlebars or feet from the footrests during operation can reduce your ability to control the vehicle or cause loss of balance and ejection from the ATV. If the operator's foot is not firmly planted on the footrest, it could also contact the rear wheels.

  • Page 19: Descending Hills Improperly

    Safety Warnings Descending Hills Improperly Improperly descending a hill could cause loss of control or overturn. • Always follow proper procedures for travel- ing down hills as described in the owner's manual. NOTE: A special technique is required when braking while traveling down- hill.

  • Page 20: Stalling While Climbing A Hill

    SAFETY Safety Warnings Stalling While Climbing a Hill Stalling, rolling backwards or improperly dismounting while climbing a hill could cause an overturn. • Always maintain a steady speed when climbing a hill. If all forward speed is lost: • Keep body weight uphill. •...

  • Page 21: Operating On Slippery Terrain

    SAFETY Safety Warnings Operating on Slippery Terrain Failure to use extra caution when operating on excessively rough, slippery or loose terrain could cause loss of traction, loss of control, accident or overturn. Do not operate on excessively rough, slippery or loose terrain.

  • Page 22: Improper Tire Maintenance

    SAFETY Safety Warnings Operating Improperly in Reverse Improperly operating in reverse could result in a collision with an obstacle or person. Always follow proper operating procedures as outlined in this manual. See page 55. Before shifting into reverse gear, always check for obstacles or people behind the ATV.

  • Page 23: Skidding Or Sliding

    Safety Warnings Operating Over Obstacles Improperly operating over obstacles could cause loss of control or overturn. Before operating in a new area, check for obstacles. Avoid operating over large obstacles such as rocks and fallen trees. If unavoidable, use extreme caution and always follow proper operating procedures as outlined in this manual.

  • Page 24: Improper Cargo Loading

    Safety Warnings Improper Cargo Loading Overloading the ATV or carrying/towing cargo improperly may cause changes in handling, which could cause loss of control or an accident. • Never exceed the stated load capacity for this ATV. • Cargo should be properly distributed and securely attached. •...

  • Page 25: Operating A Damaged Atv

    SAFETY Safety Warnings Operating a Damaged ATV Operating a damaged ATV can result in an accident. After any overturn or accident, have a qualified service dealer inspect the entire machine for possible damage, including (but not limited to) brakes, throttle and steering systems. Physical Skills Safe operation of this rider-active vehicle requires good judgement and physical skills.

  • Page 26: General Warning

    If an informational or graphic label becomes illegible or comes off, con- tact your Polaris dealer to purchase a replacement. Replacement safety labels are provided by Polaris at no charge. The part number is printed on the label. General Warning...

  • Page 27: Discretionary Warning

    Safety Labels and Locations Discretionary Warning WARNING • Never operate this ATV on HILLS steeper than 25 degrees 25°. To prevent overturn on hilly terrain, use throttle and brakes gradually, and shift weight uphill. • REVERSE operation can be dangerous even at low speeds. Steering becomes difficult.

  • Page 28: No Passenger" Warning

    Safety Labels and Locations Age 16 Warning Rack Warning “No Passenger” Warning WARNING NEVER ride as a passenger. Passengers can cause a loss of control, resulting in SEVERE INJURY or DEATH. Tire Pressure/Load Warning WARNING Improper tire pressure or overloading can cause loss of control. Loss of control can result in severe injury or death.

  • Page 29: Age 16 Warning

    Safety Labels and Locations Age 16 Warning WARNING Operating this ATV if you are under the age of 16 increases your chance of severe injury or death. NEVER operate this ATV if you are under age 16. Rack Warning, Front and Rear WARNING •...

  • Page 30: Features And Controls

    FEATURES AND CONTROLS Switches Main Key Switch Headlight Switch Engine Mode/Reverse All Wheel Drive Stop Switch Override Switch Button Mode/Reverse Override Switch This vehicle is equipped with a reverse speed limiter system. To gain additional wheel speed while backing, release the throttle and depress the override button.

  • Page 31: Features And Controls

    The throttle lever is spring loaded. Engine speed returns to idle when the lever is released. This ATV is equipped with Polaris Electronic Throttle Control (ETC), which is designed to reduce the risk of a frozen or stuck throttle. If the...

  • Page 32: Brake Lever

    FEATURES AND CONTROLS Brake Lever WARNING Operating the ATV with a spongy brake lever can result in loss of braking, which could cause an accident. Never operate the ATV with a spongy-feeling brake lever. Always contact your dealer for service before operating the vehicle. Squeeze the brake lever toward the handlebar to apply the front and rear brakes.

  • Page 33: Parking Brake

    Parking Brake Locking the Parking Brake 1. Place the transmission in gear. 2. Squeeze and release the brake lever two or three times, then squeeze and hold. 3. Push the parking brake lock forward to engage the lock. 4. Release the brake lever. 5.
  • Page 34 FEATURES AND CONTROLS Auxiliary Foot Brake WARNING Aggressively applying the auxiliary brake when backing down a hill may cause rear tipover, which could result in serious injury or death. Never back down a hill. Use caution when applying the auxiliary brake. Do not aggressively apply the auxiliary brake when going forward.

  • Page 35: Brake Fluid

    Always maintain brake fluid at the recommended level. Do not overfill. If the fluid level is low add DOT 4 brake fluid only. See page 109 for the part numbers of Polaris products. Under normal operation, the diaphragm extends into the reservoir as fluid level drops.
  • Page 36 FEATURES AND CONTROLS Brake Fluid Hand Brake The master cylinder is located on the left handlebar. Main- tain the fluid level 1/4" (6.3 mm) below the top edge of the master cylinder. Do not over- fill. 1. Position the vehicle on a level surface.

  • Page 37: Fuel Valve

    FEATURES AND CONTROLS Choke The choke assists in starting a cold engine. Refer to the engine starting procedure on page 44 for correct choke and throttle settings during start- ing. Fuel Tank Cap Fuel Tank Always refuel with the engine stopped, and outdoors or in a well ventilated area.
  • Page 38 FEATURES AND CONTROLS Automatic Transmission Gear Selector The transmission gear selector is located on the right side of the vehicle. H: High Gear N: Neutral R: Reverse To shift gears, brake to a complete stop. When the engine is idling, move the lever to the desired gear.

  • Page 39: Recoil Starter

    Recoil Starter If the battery is too weak to start the engine, use the recoil starter. Follow the starting procedures on page 44, cranking the engine with the recoil starter instead of the main key switch. 1. Grasp the recoil starter rope handle tightly.

  • Page 40: Engaging Awd

    FEATURES AND CONTROLS All Wheel Drive (AWD) System The All Wheel Drive system is controlled by the AWD switch. When the switch is on 2X4, the ATV is in two-wheel drive at all times. When the switch is on AWD, the ATV is in all wheel drive and the AWD indicator light in the instrument cluster will be When in AWD, the demand drive unit will automatically engage any...

  • Page 41: Instrument Cluster

    Instrument Cluster Your ATV is equipped with an instrument cluster that senses vehicle speed from the right front wheel. The instrument cluster measures distance in miles as well as hours of operation. It also includes a reverse speed limiter function that limits the ATV's speed to approximately 7-9 mph (11-14 km/h).

  • Page 42: Rider Information Center

    FEATURES AND CONTROLS Instrument Cluster Rider Information Center The rider information center is located in the instrument cluster. All seg- ments will light up for 3 seconds at start-up. 1. Gear Indicator - This indicator displays gear shifter position. N = Neutral (Green) R = Reverse (Amber) 2.

  • Page 43: Operation

    Break-In Period The break-in period for your new Polaris ATV is the first ten hours of operation, or the time it takes to use the first two full tanks of gasoline. No single action on your part is as important as following the proce- dures for a proper break-in.
  • Page 44 Break-In Period Engine and Drivetrain Break-in 1. Fill the fuel tank with gasoline. See page 33. Always exercise extreme caution whenever handling gasoline. 2. Check the oil level on the dipstick. See page 67. Add oil if neces- sary to maintain the level between the safe and add marks. 3.

  • Page 45: Safe Operation Practices

    Safe Operation Practices 1. Complete the recommended safety training before operating this vehicle. See page 7. 2. Do not allow anyone under 16 years of age to operate this vehicle. Do not allow anyone with cognitive or physical disabilities to oper- ate this vehicle.

  • Page 46: Trail Etiquette

    Respect the environment in which you ride. Find out where the designated riding areas are by con- tacting your Polaris dealer, a local riding club or local officials. Help keep our trails open for recreational vehicle use. As an off-road enthusiast, you represent the sport and can set a good example (or a poor example) for others to follow.

  • Page 47: Pre-Ride Checklist

    Ensure proper operation Ensure operation Ensure proper operation Inspect, clean Drain deposits whenever visible Check operation, apply Polaris dielec- tric grease when lamp is replaced Check operation, apply Polaris dielec- tric grease when lamp is replaced Wear approved helmet, goggles, and...

  • Page 48: Starting The Engine

    Starting the Engine 1. Position the vehicle on a level surface outdoors or in a well-venti- lated area. 2. Place the transmission in neutral. 3. Lock the parking brake. Tip: The starter interlock will prevent the engine from starting if the transmission is in gear and the brake is not engaged.

  • Page 49: Cold Weather Operation

    Water in the bottom of the crankcase can lead to engine damage and must be drained. Water accu- mulation increases as outside temperature decreases. See your Polaris dealer for engine heater kits, which provide quicker warm-ups and easier starting in colder weather. OPERATION...
  • Page 50 OPERATION Driving Procedures 1. Wear a helmet and eye protection. See page 8. 2. Sit upright with both feet on the footrests and both hands on the handlebars. 3. Start the engine and allow it to warm up. 4. Shift the transmission into gear. 5.
  • Page 51 OPERATION Turning the Vehicle Your ATV is equipped with a solid rear axle, which drives both rear wheels equally at all times. This means that the wheel on the outside of the turn must travel a greater distance than the inside wheel when turning and the inside tire must slip traction slightly.

  • Page 52: Driving On Slippery Surfaces

    OPERATION Driving on Slippery Surfaces Whenever riding on slippery surfaces such as wet trails or loose gravel, or during freezing weather, follow these precautions: 1. Do not operate on excessively rough, slippery or loose terrain. 2. Slow down when entering slippery areas. 3.

  • Page 53: Driving Uphill

    Driving Uphill Braking and handling are greatly affected when operating in hilly ter- rain. Improper procedure could cause loss of control or overturn. When- ever traveling uphill, follow these precautions: 1. Drive straight uphill. 2. Avoid steep hills (25° maximum). 3.
  • Page 54 OPERATION Driving on a Sidehill (Sidehilling) Driving on a sidehill is not recommended. Improper procedure could cause loss of control or overturn. Avoid crossing the side of any hill unless absolutely necessary. If crossing a sidehill is unavoidable, follow these precautions: 1.

  • Page 55: Driving Downhill

    Driving Downhill When driving downhill, follow these precautions: 1. Avoid steep hills (25° maximum). 2. Shift body weight uphill. 3. Drive straight downhill. 4. Slow down. Excessive speed when traveling downhill can cause loss of control. 5. Squeeze the brake lever gradually. Applying the brakes too firmly may cause the rear wheels to lock, which could result in loss of con- trol.
  • Page 56 OPERATION Turning Around on a Hill (K-Turn) If the vehicle stalls while climbing a hill, never back it down the hill! Use the K-turn to turn around. 8 ft. (2.4 m) 1. Stop and lock the parking brake while keeping body weight uphill. 2.

  • Page 57: Driving Through Water

    Driving Through Water Your ATV can operate through water with a maxi- mum recommended depth equal to the bottom of the footrests. Follow these pro- cedures when operating through water: 1. Determine water depths and current before entering water. 2. Choose a crossing where both banks have gradual inclines.

  • Page 58: Driving Over Obstacles

    OPERATION Driving Over Obstacles Follow these precautions when operating over obstacles: 1. Always check for obstacles before operating in a new area. 2. Look ahead and learn to read the terrain. Be constantly alert for haz- ards such as logs, rocks and low hanging branches. 3.

  • Page 59: Driving In Reverse

    Driving in Reverse Follow these precautions when operating in reverse: 1. Always check for obstacles or people behind the vehicle. 2. Always avoid backing downhill. 3. Back slowly. 4. Apply the brakes lightly for stopping. 5. Avoid turning at sharp angles. 6.

  • Page 60: Hauling Cargo

    OPERATION Hauling Cargo WARNING Overloading the vehicle or carrying or towing cargo improperly can alter vehicle handling and may cause loss of control or brake instability, which can result in serious injury or death. Always follow these precautions when hauling cargo: REDUCE SPEED AND ALLOW GREATER DISTANCES FOR BRAKING WHEN HAULING CARGO.

  • Page 61: Towing Loads

    ATV warranty. Never install a hitch longer than 4" (10 cm). Never install automotive accessories on your Polaris ATV. Always install Polaris-approved (or equivalent) accessories designed for ATV use. OPERATION Maximum 4"...

  • Page 62: Parking On An Incline

    OPERATION Parking on an Incline Avoid parking on an incline if possible. If it's unavoidable, follow these precautions: 1. Stop the engine. 2. Place the transmission in gear. 3. Lock the parking brake. 4. Always block the rear wheels on the downhill side. 5.

  • Page 63: Emission Control Systems

    CFR 205) and local noise level requirements. Operation on Public Lands in the U.S.A. Your Polaris vehicle has a spark arrestor that was tested and qualified to be in accordance with the USFS standard 5100-1c. Federal law requires that this spark arrestor be installed and functional when the vehicle is operated on public lands.

  • Page 64: Periodic Maintenance Chart

    Inspect, clean, lubricate, adjust and replace parts as necessary. When inspection reveals the need for replacement parts, use genuine Polaris parts available from your Polaris dealer. Record maintenance and service in the Maintenance Log beginning on page 125.

  • Page 65: Maintenance

    Improperly performing the procedures marked with a component failure and cause an accident, which may result in serious injury or death. Always have an authorized Polaris dealer perform these services. Maintenance Chart Key Perform these operations more often for vehicles subjected to severe use.
  • Page 66 (if equipped) Transmission oil Engine breather filter (if equipped) Perform these procedures more often for vehicles subjected to severe use. E Emission-Related Service Have an authorized Polaris dealer perform these services. Maintenance Interval (whichever comes first) Hours Calendar Miles (Km)
  • Page 67 Periodic Maintenance Chart Item Hours Calendar General lubrication Carburetor float bowl Throttle Cable/ ETC Switch Choke cable E Carburetor air intake ducts/flange Drive belt Engine oil change Oil filter change Oil tank vent hose (if equipped) Valve clearance Fuel system/filter Engine mounts Exhaust muffler/ pipe...
  • Page 68 Spark arrestor Idle speed Toe adjustment Headlight aim Perform these procedures more often for vehicles subjected to severe use. E Emission-Related Service Have an authorized Polaris dealer perform these services. Maintenance Interval (whichever comes first) Hours Calendar Miles (Km) 100 H 12 M 1000 (1600) Inspect;...

  • Page 69: Lubrication Guide

    Control Arm (front and rear) Bearing Carrier Transmission (upper pivot point) Front Prop Shaft Yoke Lube PS-4 PLUS Performance Synthetic 2W-50 DOT 4 Only Polaris AGL Synthetic Gearcase Lube Premium Demand Drive Hub Fluid Polaris Premium U-Joint Lube Bearing Carrier MAINTENANCE Method See page 66.

  • Page 70: Engine Oil

    Polaris recommends the use of Polaris PS-4 PLUS Performance Syn- thetic 2W-50 4-cycle oil or a similar oil for this engine. Oil may need to be changed more frequently if Polaris oil is not used. Always use 2W-50 oil. Follow the manufacturer's recommendations for ambient tempera- ture operation.

  • Page 71: Oil Level

    Engine Oil Oil Level The oil dipstick is located behind the recoil on the right side of the ATV. 1. Position the vehicle on a level surface. 2. Place the transmission in neutral. 3. Lock the parking brake. 4. Start the engine. Allow it to idle for 30 seconds.

  • Page 72: Oil And Filter Change

    MAINTENANCE Oil and Filter Change Always change the oil and filter at the intervals outlined in the Periodic Maintenance Chart beginning on page 60. Always change the oil filter whenever changing oil. 1. Position the vehicle on a level surface. 2.
  • Page 73 Oil and Filter Change 11. Place towels under the oil filter. Using an oil filter wrench, turn the filter counter-clockwise to remove 12. Clean the filter sealing area on the engine. 13. Lubricate the filter o-ring. Check to make sure the o-ring is in good condition.

  • Page 74: Transmission Oil

    Periodic Maintenance Chart beginning on page 60. Maintain the oil level at the bottom of the fill plug hole. See page 109 for the part numbers of Polaris products. The fill plug is located on the left side of the ATV, under the rear fender, behind the wheel.

  • Page 75: Oil Check

    Transmission Oil Oil Check 1. Position the vehicle on a level surface. 2. Place the transmission in gear. 3. Lock the parking brake. 4. Remove the fill plug. Use a 15 mm wrench. 5. Check the oil level. 6. Add oil as needed. Do not overfill.

  • Page 76: Oil Change

    Transmission Oil Oil Change 1. Position the vehicle on a level surface. 2. Place the transmission in gear. 3. Lock the parking brake. 4. Remove the fill plug. Use a 15 mm wrench. 5. Place a drain pan under the gearcase. 6.
  • Page 77 Periodic Maintenance Chart beginning on page 60. We recommend the use of Polaris Premium Demand Drive Hub Fluid. Use of other oils may result in improper operation of compo- nents. See page 109 for the part numbers of Polaris products.
  • Page 78 Front Gearcase (Demand Drive) Fluid Fluid Check 1. Position the vehicle on a level surface. 2. Place the transmission in gear. 3. Lock the parking brake. 4. Remove the fill plug. Use an 8 mm Allen wrench. 5. Check the oil level. 6.

  • Page 79: Fluid Change

    Front Gearcase (Demand Drive) Fluid Fluid Change 1. Position the vehicle on a level surface. 2. Place the transmission in gear. 3. Lock the parking brake. 4. Remove the fill plug. Use an 8 mm Allen wrench. 5. Place a drain pan under the gearcase.

  • Page 80: Brake Inspections

    MAINTENANCE Brakes The front and rear brakes are hydraulic disc brakes, activated by moving the single brake lever toward the handlebar. The auxiliary foot brake is also hydraulic. Both brake systems are self-adjusting. Brake Inspections The following checks are recommended to keep the brake system in good operating condition.

  • Page 81: Toe Alignment

    1/8" to 1/4" (3-6 mm) toe out alignment. 5. Repeat the measurement procedure on the other side of the vehicle. 6. If you discover improper alignment, see your Polaris dealer for ser- vice. Stand...

  • Page 82: Side Panel Removal

    MAINTENANCE Steering Assembly The steering assembly of the ATV should be checked periodically for loose nuts and bolts. If loose nuts and bolts are found, see your Polaris dealer for service before operating the vehicle. Side Panel Removal 1. Remove the seat.

  • Page 83: Tire Tread Depth

    1/8" (3 mm) when tread depth is worn to 1/8" (3 mm) or less. Front Wheel Hub Tightening Front wheel bearing tightness and spindle nut retention are critical com- ponent operations. All service must be performed by your authorized Polaris dealer.

  • Page 84: Wheel Removal

    4. Loosen the wheel nuts slightly. WARNING! Do not service axle nuts that have a cotter pin installed. See your Polaris dealer. 5. Place a suitable stand under the footrest frame to raise the wheel slightly off the ground. 6. Remove the wheel nuts.

  • Page 85: Wheel Installation

    Tires Wheel Installation 1. Place the wheel on the wheel hub with the valve stem toward the outside and the rotation arrows on the tire pointing toward forward rotation. 2. Install the wheel nuts finger tight. 3. Lower the vehicle to the ground. 4.
  • Page 86 Air Filter/Breather Filter 1. Position the vehicle on a level surface. 2. Place the transmission in gear. 3. Lock the parking brake. 4. Remove the seat. 5. Release the air box cover clips, and remove the air box cover. 6. Remove the air filter. 7.

  • Page 87: Headlight Beam Adjustment

    Lights Headlight Beam Adjustment The headlight beam can be adjusted slightly upward or downward. Use the following procedure to make the adjustment. 1. Position the vehicle on a level surface with the headlight approxi- mately 25 ft. (7.6 m) from a wall. 2.

  • Page 88: Headlamp Replacement

    Lights Poor lighting can result in reduced visibility when driving. Headlight and taillight lenses become dirty during normal operation. Clean lights frequently and replace burned out lamps promptly. Always make sure lights are adjusted properly for best visibility. Headlamp Replacement When servicing a halogen lamp, don't touch the lamp with bare fingers.

  • Page 89: Recoil Housing

    Recoil Housing Always drain the recoil housing after operating the vehicle in wet condi- tions. Drain the housing before storing the vehicle. Make sure the hous- ing is completely dry before reinstalling the drain plug. 1. Place the transmission in gear. 2.

  • Page 90: Spark Plugs

    Refer to the specifications section beginning on page 114 for the recom- mended spark plug type and gap for your vehicle. Torque spark plugs to specification. NOTICE: Using non-recommended spark plugs can result in serious engine damage. Always use Polaris-recommended spark plugs. Plug Condition New Spark Plug Previously Installed Spark Plug Spark Plug Inspection Spark plug condition is indicative of engine operation.

  • Page 91: Spark Plug Condition

    Spark Plugs Spark Plug Inspection 4. Inspect the electrodes for wear and carbon buildup. Replace worn or fouled plugs. Verify that the gap is at specification before installation. 5. Reverse the procedure for spark plug installation. Torque to specification. Spark Plug Condition Normal Spark Plug The normal insulator tip is gray, tan or light brown.

  • Page 92: Vehicle Immersion

    MAINTENANCE Vehicle Immersion If your vehicle becomes immersed, major engine damage can result if the machine is not thoroughly inspected. Take the vehicle to your dealer before starting the engine. If it's impossible to take your ATV to a dealer before starting it, follow the steps outlined below.

  • Page 93: Spark Arrestor

    Spark Arrestor WARNING Failure to heed the following warnings while servicing the spark arrestor could result in serious injury or death. Never run the engine in an enclosed area. Remove any combustible materials from the area. Wear eye protection and leather work gloves.

  • Page 94: Pvt System

    • Always follow all recommended maintenance procedures. See your dealer as outlined in the owner's manual. • This PVT system is intended for use on Polaris products only. Do not install it in any other product. • Always make sure the PVT housing is securely in place during operation.

  • Page 95: Pvt Drying

    PVT System PVT Drying There may be some instances when water is accidently ingested into the PVT system. Use the following instructions to dry it out before operating. 1. Move the vehicle out of the water. 2. Remove the PVT drain plug. Use a 17 mm wrench, a flat screw- driver, or the spark plug wrench.
  • Page 96 MAINTENANCE Battery WARNING Improperly connecting or disconnecting battery cables can result in an explosion and cause serious injury or death. When removing the battery, always disconnect the negative (black) cable first. When reinstalling the battery, always connect the negative (black) cable last. WARNING Battery electrolyte is poisonous.

  • Page 97: Battery Removal

    Battery Battery Removal 1. Place the transmission in gear. 2. Lock the parking brake. 3. Open the front cover. 4. Disconnect the battery hold-down strap. 5. On conventional batteries, remove the battery vent tube. 6. Disconnect the black (negative) battery cable first.

  • Page 98: Battery Installation

    MAINTENANCE Battery Battery Installation Using a new battery that has not been fully charged can damage the bat- tery and result in a shorter life. It can also hinder vehicle performance. Follow the battery charging instructions on page 96 before installing the battery.

  • Page 99: Battery Storage

    Check battery voltage each month during storage and recharge as needed to maintain a full charge. Polaris recommends maintaining battery charge by using a Polaris Bat- tery Tender charger or by charging about once a month to make up for normal self-discharge.
  • Page 100 MAINTENANCE Battery Battery Charging (Conventional Battery) 1. Remove the battery from the vehicle to prevent damage from leak- ing or spilled electrolyte during charging. See page 93. 2. Charge the battery with a charging output no larger than 1/10 of the battery’s amp/hr rating.
  • Page 101 Battery Battery Charging (Sealed Battery) Always verify battery condition before and 1-2 hours after the end of charging. State of Voltage Charge 100% 12.8-13.0 volts 75%-100% 12.5-12.8 volts 50%-75% 12.0-12.5 volts 25%-50% 11.5-12.0 volts 0%-25% 11.5 volts or less MAINTENANCE Action charger @ standard amps specified on top of battery)

  • Page 102: Cleaning And Storage

    Do not allow these types of products to contact the vehicle. The best and safest way to clean your Polaris vehicle is with a garden hose and a pail of mild soap and water. 1. Use a professional-type washing cloth, cleaning the upper body first and the lower parts last.

  • Page 103: Polishing The Vehicle

    Polishing the Vehicle Polaris recommends the use of common household aerosol furniture polish for polishing the finish on your Polaris vehicle. Follow the instructions on the container. Polishing Tips • Avoid the use of automotive products, some of which can scratch the finish of your vehicle.
  • Page 104 Cleaning and Storage Chrome Wheel Care (if equipped) Proper maintenance will protect chrome wheels from corrosion, pre- serve wheel life and ensure a "like new" appearance for many years. Chrome wheels exposed to road salt (or salt in the air in coastal areas) are more susceptible to corrosion if not properly cleaned.

  • Page 105: Storage Tips

    98. Stabilize the Fuel 1. Fill the fuel tank. 2. Add Polaris Carbon Clean Fuel Treatment or Polaris Fuel Stabilizer. Follow the instructions on the container for the recommended amount. Carbon Clean removes water from fuel systems, stabilizes fuel and removes carbon deposits from pistons, rings, valves and exhaust systems.
  • Page 106 7. If Polaris fuel system additive is not used, the fuel tank, fuel lines, and carburetor should be completely drained of gasoline.
  • Page 107 Set the tire pressure and safely support the ATV with the tires slightly off the ground. Be sure the storage area is well ventilated. Cover the vehicle with a genuine Polaris cover. Do not use plastic or coated mate- rials. They do not allow enough ventilation to prevent condensation, and may promote corrosion and oxidation.

  • Page 108: Transporting The Vehicle

    Transporting the Vehicle Follow these procedures when transporting the vehicle. 1. Stop the engine. 2. Place the transmission in gear. 3. Lock the parking brake. 4. Turn the fuel valve off. 5. Secure the fuel cap, oil cap and seat. 6.

  • Page 109: Adjustments

    Spring Adjustments The front and rear shock absorber springs are adjustable. Rotate the adjuster either clockwise or counter-clockwise to increase or decrease spring tension. Always adjust both sides equally. Accessory springs are available through your Polaris dealer. Rear Adjuster Front...
  • Page 110 Follow the adjustment procedures exactly, or see your Polaris dealer for service. 1. Loosen the four handlebar bolts.
  • Page 111 Carburetor Your Polaris ATV is calibrated at the factory for optimal performance at altitudes ranging from zero to 6,000 feet (1800 m) and temperatures of +40 degrees F. (4 degrees C.) or higher. Above 6000 feet (1800 m) the engine air/fuel mixture becomes overly rich and the engine loses approximately 3% of its power for each 1000-foot (304.8 m) increase in...

  • Page 112: Throttle Cable Freeplay

    ADJUSTMENTS Throttle Cable Freeplay Adjust throttle cable freeplay at the handlebar. 1. Locate the throttle cable adjuster at the handlebar. 2. Squeeze the end of the rub- ber boot and slide it far enough to expose the end of the inline cable adjuster. 3.

  • Page 113: Polaris Products

    Chain Lube, Aerosol (6.25 oz.) 2872348 Chain Lube, Aerosol (16 oz.) 2871326 Carbon Clean Plus (12 oz.) 2870652 Fuel Stabilizer (16 oz.) 2872189 DOT4 Brake Fluid (12 oz.) 2871956 Loctite 2859044 Polaris Battery Tender Engine Lubricant Additives / Miscellaneous 565 Thread Sealant Charger...

  • Page 114: Drive Belt Wear/Burn

    Dry out the PVT. See page 91. Inspect clutch seals for damage if repeated leaking occurs. See your Polaris dealer. Check for fouled plugs or foreign material in gas tank or fuel lines. See your dealer.

  • Page 115: Troubleshooting

    Replace with fresh recommended fuel Inspect plugs and replace if necessary Inspect plugs, verify stop switch is on Inspect, clean and/or replace spark plugs Immediately see your Polaris dealer Recharge the battery to 12.8 VDC See your dealer Solution Inspect, clean and/or replace spark...
  • Page 116 Engine Pings or Knocks Possible Cause Poor quality or low octane fuel Incorrect ignition timing Incorrect spark plug gap or heat range Idle set too low Engine Runs Irregularly, Stalls or Misfires Possible Cause Fouled or defective spark plug(s) Worn or defective spark plug wires Incorrect spark plug gap or heat range Loose ignition connections Water present in fuel...

  • Page 117: Engine Overheating

    Engine Stops or Loses Power Possible Cause Out of fuel Kinked or plugged fuel vent line Water is present in fuel Overuse of choke Fouled or defective spark plug(s) Worn or defective spark plug wires Incorrect spark plug gap or heat range Loose ignition connections Low battery voltage Incorrect fuel...
  • Page 118 299 cc 78.5 x 68 250 w 9.2:1 Mikuni BST 34 0-5M 4HC57-3 DC CDI 10° +/- 2° @ 1500 RPM/30° +/- 2° @ 5000 RPM NGK CR8E / .031 in. (0.8 mm) Automatic PVT (Polaris Variable Transmission) Side Lever (H/N/R)

  • Page 119: Specifications

    Drive Ratio, Front Drive Ratio, Final Tires/Pressure, Standard models Tires/Pressure, LE models Front Suspension Rear Suspension Shock Adjustment Brakes, Front and Rear Brake, Auxiliary Brake, Parking Headlight Taillights Brake Light Battery DC Plug-In (rear) Windshield Speedometer/Odometer/ Tripmeter/Hourmeter Fuel Gauge Tool Kit Jetting Chart ALTITUDE Meters (Feet)

  • Page 120: Declaration Of Conformity

    Polaris Industries Inc., 2100 Hwy 55, Medina, MN 55340 U.S.A. Telephone 763-542-0500 We, Polaris Industries Inc., declare that the vehicles listed below conform to the essential health and safety requirements applicable to off-road all-terrain vehicles. APPLICABLE EUROPEAN DIRECTIVES 98/37/EC as amended (Machinery Directive)

  • Page 121: Warranty

    WARRANTY LIMITED WARRANTY Polaris Sales Inc., 2100 Highway 55, Medina, MN 55340, gives a SIX MONTH LIM- ITED WARRANTY on all components of the Polaris All Terrain Vehicle (ATV) against defects in material or workmanship. Polaris also gives a one year limited warranty on the final drive chain for failure due to defects.
  • Page 122 WARRANTY COVERAGE AND EXCLUSIONS: LIMITATIONS OF WARRANTIES AND REMEDIES The Polaris limited warranty excludes any failures that are not caused by a defect in material or workmanship. This warranty does not cover accidental damage, normal wear and tear, abuse or improper handling. This warranty also does not cover any ATV that...
  • Page 123 ATV. The exclusive remedy for breach of this warranty shall be, at Polaris' exclusive option, repair or replacement of any defective materials, or com- ponents or products. THE REMEDIES SET FORTH IN THIS WARRANTY ARE THE ONLY REMEDIES AVAILABLE TO ANY PERSON FOR BREACH OF THIS WAR- RANTY.
  • Page 124 HOW TO OBTAIN WARRANTY SERVICE If your ATV requires warranty service, you must take it to a Polaris dealer authorized to repair Polaris ATVs. When requesting warranty service you must present your copy of the Warranty Registration form to the dealer.
  • Page 125 How to Get Service In the Country where your vehicle was purchased: Warranty or Service Bulletin repairs must be done by an authorized Polaris dealer. If you move or are traveling within the country where your vehicle was purchased, Warranty or Service Bulletin repairs may be requested from any authorized Polaris dealer who sells the same line as your vehicle.
  • Page 126 How to Get Service If Purchased From A Private Party: If you purchase a Polaris product from a private citizen, to be kept and used outside of the country in which the vehicle was originally purchased, all warranty coverage will be denied.
  • Page 127 This emissions limited warranty is in addition to the Polaris standard limited warranty for your vehicle. Polaris Industries Inc. warrants that at the time it is first purchased, this emissions-certified vehicle is designed, built and equipped so it conforms with applica- ble U.S.
  • Page 128 Polaris dealer to perform any service that may be necessary for your vehicle. Polaris also recommends that you use only Pure Polaris parts. It is a potential violation of the Clean Air Act if a part supplied by an aftermarket parts manufacturer reduces the effectiveness of the vehicle's emission controls.

  • Page 129: Maintenance Log

    MAINTENANCE LOG Present this section of your manual to your dealer each time your vehicle is serviced. This will provide you and future owners with an accurate log of maintenance and ser- vices performed. DATE MILES (KM) TECHNICIAN SERVICE PERFORMED / COMMENTS OR HOURS...

  • Page 130: Maintenance Log

    MAINTENANCE LOG DATE MILES (KM) TECHNICIAN SERVICE PERFORMED / COMMENTS OR HOURS...

  • Page 131: Index

    Accessories ....103 Air Filter ..... . 82 All Wheel Drive Switch .

  • Page 132: Index

    Periodic Maintenance Chart ..60-64 Polaris Product List ... . . 109 Polishing the Vehicle... . . 99 Pre-Ride Checklist.
  • Page 133 Storage ....98-103 Switches AWD Switch... . 27, 36 Engine Stop Switch..26 Headlight Switch.

This manual is also suitable for:

Sportsman 300Sportsman 300 20102010 sportsman 300

Table of Contents