Rear Brake Pads; Pad Removal - Polaris 2012 RANGER RZR 570 INTL Service Manual

BRAKES

REAR BRAKE PADS

Pad Removal

1. Elevate and support rear of vehicle.
Use care when supporting vehicle so that it
does not tip or fall.
Severe injury may occur if machine tips or falls.
2. Remove the rear wheel.
3. Loosen pad adjuster screw 2-3 turns.
4. Remove and discard the two caliper mounting bolts
and lift caliper off the brake disc.
NOTE: When re moving ca liper, be careful
damage brake line. Support caliper so as not to kink
or bend brake line.
9.22
CAUTION
not to
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
5. Push caliper piston into the caliper bore slowly using
a C-clamp or locking pliers with pads installed.
NOTE: Brake fluid will be
compensating p ort in to ma ster c ylinder fluid
reservoir whe n pist on is p ushed ba ck in to c aliper.
Remove excess fluid from reservoir as required.
6. Push caliper mounting bracket inward and slip outer
brake pad past the edge to remove.
7. Remove the inner brake pad.
f orced t hrough