Shocks / Springs / Fasteners; Exploded View; Shock Removal / Installation - Polaris 2012 RANGER RZR 570 INTL Service Manual

SHOCKS / SPRINGS / FASTENERS

Exploded View

Front Shock Mounting
37 ft. lbs.
(50 Nm)
37 ft. lbs.
(50 Nm)
Rear Shock Mounting
37 ft. lbs.
(50 Nm)
37 ft. lbs.
(50 Nm)
Retainer gap
should be 180°
from spring end
Spring
Adjusting Cam
Front of Vehicle
Retainer gap
should be 180°
from spring end
Spring
Adjusting Cam
Front of Vehicle
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
BODY / STEERING / SUSPENSION

Shock Removal / Installation

1. Elevate the ve hicle off the g round to r elieve the
suspension load.
2. Remove the stabilizer ba r upper link age bushings /
nut from both sides. Rotate the stabilizer bar upward.
3. Remove the upper and lower fasteners retaining the
shock and remove the shock from the vehicle.
NOTE: It may be necessary to use a commercially
available swivel socket to remove and install the LR
upper shock bolt.
4. Reverse the procedure to reinstall the shock. Torque
new fasteners to spe cification ( refer to explo ded
views).
5
5.27