Setting Up Mus - Symbol Spectrum24 AP-3020 Reference Manual

Hardware Installation
6. Slow or erratic performance:

4.10 Setting Up MUs

Refer to MU documentation for installing drivers, client software and testing.
Use the default values for the Net_ID (ESSID) and other configuration
parameters until network connection verification.
MUs attach to the network and interact with the AP transparently.
138
– Check MU and RF communications range.
– Check antenna, connectors and cabling.
– Verify the AP is using the primary antenna connection for single
antenna use.
– Verify that antenna diversity setting for AP is appropriate. If using
one antenna, the setting is
setting is
Primary and Secondary
– Verify network traffic does not exceed 37% of bandwidth.
– Check to see that the wired network does not exceed 10 broadcast
messages per second.
– Verify wired network topology and configuration.
Primary Only
Spectrum24 Access Point AP-3020 Product Reference Guide
, if using two antennas, the
.