M108S, WSM
4. CHECKING, DISASSEMBLING AND SERVICING
[1] CHECKING AND ADJUSTING
(1) Traveling Clutch
Clutch Pedal Stroke
1. Stop the engine and remove the key.
2. Screw the lock nuts (1), (2) to the threaded end of cable as shown
in figure.
3. Measure the clutch pedal stroke A.
4. If the measurement is not within the factory specifications, adjust
with stopper bolt (3).
Total stroke A
Factory spec.
NOTE
• Be sure to fix the coil spring (4) in original direction when
hooking the coil spring as shown in figure.
(1) Lock Nut
(2) Lock Nut
2-S4
CLUTCH
150 to 155 mm
5.91 to 6.10 in.
(3) Stopper Bolt
(4) Coil Spring
W1012478
KiSC issued 05, 2012 A