wsm M108S Workshop Manual page 84

M108S, WSM
13.6-24
3.6R24
12.4-24
1565 mm (61.61 in.)
A : Tread
NOTE
• Need to limit turning angle depended on the tire size.
instructions.
Angle 0.52 rad (30 °) 0.58 rad (33 °) 0.65 rad (37 °) 0.73 rad (42 °) 0.79 rad (45 °) 0.87 rad (50 °)
Stopper
A : 5 mm (0.2 in.) Collar
1675 mm (65.94 in.)
Refer to the chart provided for additional
Front Wheel Steering Angle
1. Inflate the tires to the specified pressure.
2. Adjust turning angle with the stopper bolts table of the below.
3. The right side is similarly adjusted.
IMPORTANT
• Always check if tires contact with tractor or loader frame
assemblies.
(1) Stopper Bolt
Stopper Bolt (ex. LH stopper bolt)
G-67
G GENERAL
B : Front
W1057295
KiSC issued 05, 2012 A