Engine Start Condition - wsm M108S Workshop Manual

M108S, WSM

(2) Engine Start Condition

Engine Start Condition
IMPORTANT
• Before starting the engine, make sure the main gear shift
lever at the neutral position.
• Place the PTO lever to the OFF position.
• Apply the parking brake.
1. Check the engine start condition as follows :
NOTE
• Do not touch the shuttle lever (1) when the shuttle lever (1)
is at specified position as shown in figure.
(Reference)
• Position A : Engine start
• Position B : Engine does not start
• Position C : Engine does not start
2. If the engine started at position B and/or C, adjust the shuttle
cable with retaining nut (refer with this section).
(1) Shuttle Lever
3-S8
TRANSMISSION
(2) Shuttle Lever Guide
W1011278
KiSC issued 05, 2012 A