Handling Of Circuit Tester - wsm M108S Workshop Manual

M108S, WSM

[5] HANDLING OF CIRCUIT TESTER

• Use sandpaper to remove rust from terminals.
• Repair deformed terminal. Make certain there is no terminal
being exposed or displaced.
(1) Exposed Terminal
(2) Deformed Terminal
• Make certain that there is no female connector being too open.
(A) Correct
• Make certain plastic cover is large enough to cover whole
connector.
(1) Cover
• Use tester correctly following manual provided with tester.
• Check for polarity and range.
G-6
G GENERAL
(3) Sandpaper
(4) Rust
W1012346
(B) Incorrect
W1012430
(A) Correct
(B) Incorrect
W1012519
W1012684
KiSC issued 05, 2012 A