Front Wiper Motor - wsm M108S Workshop Manual

M108S, WSM

(13) Front Wiper Motor

Wiper Switch
1. Check the continuity through the switch with an ohmmeter.
2. If the continuity specified below are not indicated, the switch is
faulty.
Terminal
IN
Position
WASH I
ON
OFF
INT
WASH II
(1) Front Wiper Switch Connector
Front Wiper Motor
1. Raise up the front wiper arm (1).
2. Turn on the main switch.
3. Push the front wiper switch to ON position.
4. Count the number of wiper arm moving per minutes.
5. If the number differs from the factory specifications, replace the
wiper motor assembly.
Wiper arm moving at no
Factory spec.
load
(1) Wiper Arm
10-S31
+1 E WY
33 to 43 times / min.
KiSC issued 05, 2012 A
CABIN
WM
W1046557
W1047741