wsm M108S Workshop Manual page 355

M108S, WSM
Front Bracket and Rear Bracket Bushing
1. Visually inspect the DX bushing for signs of wear or damage.
(The DX bushing tends to show concentrated wear.)
2. If the DX bushing is worn beyond the alloy portion (A), replace it.
Front bracket and rear
Alloy thickness (A)
bracket bushing
Pinion bearing case
Factory spec.
O.D.
Front differential case
Factory spec.
boss O.D.
Bearing Retainer and Front Wheel Case Support Bushing
1. Visually inspect the DX bushing for signs of wear or damage.
(The DX bushing tends to show concentrated wear.)
2. If the DX bushing is worn beyond the alloy portion (A), replace it.
Front wheel case
Alloy thickness (A)
support bushing
Bearing retainer O.D. Factory spec.
6-S19
FRONT AXLE
0.57 mm
0.022 in.
64.970 to 65.000 mm
2.5579 to 2.5590 in.
64.970 to 65.000 mm
2.5579 to 2.5590 in.
W1022130
0.57 mm
0.022 in.
64.970 to 65.000 mm
2.5579 to 2.5590 in.
W1022243
KiSC issued 05, 2012 A