M8540Narrow, M9540Narrow, WSM
3. CHECKING, DISASSEMBLING AND SERVICING
[1] CHECKING AND ADJUSTING
CAUTION
• When checking, park the tractor on flat ground, and stop the engine.
(1) Traveling Brake
Adjusting Brake Pedal
WARNING
• Be sure brake pedals have equal adjustment when using
locked together. Incorrect or unequal brake pedal
adjustment can cause the tractor to swerve or roll-over.
1) Brake Pedal Free Travel
1. Set the parking brake.
2. Slightly depress the brake pedals and measure free travel at the
top of pedal stroke.
3. If the measurement is not within the factory specifications,
adjust the free travel by the turn buckle (2) or push rod (3).
4. After adjustment, tighten the lock nut firmly.
IMPORTANT
• Keep the free travel in the right and left brake pedals equal.
Brake pedal free travel
Factory specification
"L"
Brake rod turn backle lock
Tightening torque
nut
(1) Brake Pedal
(2) Turn Buckle
(3) Push Rod
N5-S3
BRAKES
9Y1210236BRS0003US0
7 to 14 mm
0.28 to 0.55 in.
Keep the free travel in the
both brake pedal equal
29.4 to 34.3 N·m
3.00 to 3.49 kgf·m
21.7 to 25.2 lbf·ft
L:
Free Travel
[A] ROPS Model
[B] CABIN Model
9Y1210236BRS0004US0
KiSC issued 07, 2013 A