wsm M108S Workshop Manual page 44

M108S, WSM
Cleaning Inner Air Filter
1. Remove the inner air filter, and blow air the direction opposite to
the filter's normal air flow. Pressure of compressed air must be
under 210 kPa (2.1 kgf/cm
How to attach and detach the push-rivet assembly.
• Detaching procedure
To remove the push rivet of the indoor air filter, hold the rivet
around its head (3), apply a phillips screwdriver to the recess (A)
and turn the rivet counterclockwise.
• Attaching procedure
To fix the push rivet in the indoor air filter, put the rivet end in the
filter and push on the rivet head (3) all the way.
(1) Inner Filter
(2) Push-rivet
(3) Rivet Head
G-27
G GENERAL
2
, 30 psi).
A : Recess
B : Push
KiSC issued 05, 2012 A
W1047808