Tires; Type Of Tires; Tread Adjustment; Front Wheel - wsm M108S Workshop Manual

M108S, WSM

9. TIRES

[1] TYPE OF TIRES

[2] TREAD ADJUSTMENT

CAUTION
• When working on slopes or when working with trailer, set the wheel tread as wide as practical for maximum
stability.
• Support tractor securely on stands before removing a wheel.
• Never operate tractor with a loose rim, wheel, or axle.

(1) Front Wheel

IMPORTANT
• Do not use tires larger than specified.
Type of Tire
9.5L-15
10.0-16 6PR
Farm Tire 12.4-24 6PR
13.6-24 6PR
13.6R24
Adjusting Front Tread
Front tread width can be adjusted as shown with the standard
equipped tires.
To change the tread width.
1. Remove the wheel rim and disk mounting bolts.
2. Change the position of the rim and disk (right and left) to the
desired position, and tighten the bolts.
3. Adjust the toe-in. (Refer to "[5] CHECK POINTS OF EVERY
200 HOURS" in this section.)
IMPORTANT
• Always attach wheel as shown in the drawing.
• If not attached as illustrated, transmission parts may be
damaged.
• When re-fitting or adjusting a wheel, tighten the bolts to the
following torques then recheck after driving the tractor 200
m (200 yards) and thereafter according to service interval.
Refer to "Check Wheel Mounting Nuts Tightening Torques".
(Refer to "[3] CHECK POINTS OF EVERY 50 HOURS" in
this section.)
(1) Nut
G-66
G GENERAL
Front Rear
16.9-34 6PR
18.4-34
18.4R36
18.4-30
18.4R30
W1019656
W1056420
KiSC issued 05, 2012 A