wsm M108S Workshop Manual page 474

M108S, WSM
Cooling or dehumidifying-heating
1. Set the mode switch to the (a) or (b) position.
2. Set the recirculation / fresh air selection lever to the
"FRESH AIR" position. To fall the temperature in the
CAB quickly,
"RECIRCULATION" position.
3. Press and turn on the air-conditioner switch (3) with
indicator.
4. Turn on the blower (1 / 2 / 3) switch (4).
5. Adjust the temperature control dial (1) to the "Cool"
(end of counterclockwise) position. Otherwise, hot air
will raise the temperature in the CAB.
(1) Temperature Control Dial
(2) Mode Switch
(3) Air Conditioner Switch with
Indicator Light
(4) Blower Switch
Foot warming and head cooling
1. Set the mode switch (2) to the (b) position.
2. In the cooling or dehumidifying-heating mode, set the
temperature control dial (1) at the center position
area.
3. Open the front air outlet and the door air outlet direct
it to your feet.
4. You can feel your head cool and your feet warm.
(1) Temperature Control Dial
(2) Mode Switch
10-M8
set this lever to
(A) Warm
(B) Cool
W1014533
(A) Center Position Area
W1014813
KiSC issued 05, 2012 A
CABIN
the