Thermostat; Injection Pump Unit - wsm M108S Workshop Manual

M108S, WSM

(6) Thermostat

(7) Injection Pump Unit

Thermostat Assembly
1. Remove the thermostat cover mounting screws, and remove the
thermostat cover (1).
2. Remove the thermostat assembly (3).
(When reassembling)
• Apply a liquid gasket (Three Bond 1215 or equivalent) only at the
thermostat cover side of the gasket (2).
• Attach the thermostat with its hole facing toward the air suction
side.
(1) Thermostat Cover
(2) Thermostat Cover Gasket
Fan Drive Pulley
1. Set the stopper to the flywheel.
2. Remove the crankshaft screw (2).
3. Draw out the fan drive pulley (1).
(When reassembling)
Tightening torque Crankshaft screw
(1) Fan Drive Pulley
1-S37
ENGINE
(3) Thermostat Assembly
(4) Hole
W1072747
255 to 274 N·m
26.0 to 28.0 kgf·m
188 to 202 lbf·ft
(2) Crankshaft Screw
W1185033
KiSC issued 05, 2012 A