wsm M108S Workshop Manual page 306

M108S, WSM
Rear Axle Nut
1. Fix the rear axle on the repair table or set to the rear wheel.
2. Remove the stake on the rear axle nut.
3. Remove the rear axle nut with a rear axle nut wrench 98 (Code
No. 07916-52521).
(When reassembling)
Tightening torque Rear axle nut
(1) Rear Axle Nut Wrench
Rear Axle Cover
1. Remove the rear axle cover (2) with a rear axle cover puller (1)
(Code No. 07916-51041).
(When reassembling)
• Apply grease to the oil seal lips.
(1) Rear Axle Cover Puller
4-S8
REAR AXLE
393 to 588 N·m
40.0 to 60.0 kgf·m
290 to 433 lbf·ft
W1014181
(2) Rear Axle Cover
W1014398
KiSC issued 05, 2012 A