User Details Setup - Fuji Xerox DocuCentre-IV C2260 Administrator's Manual

Restrict User to Edit Address Book
Select whether or not to remove restriction when the edit of the Address Book is restricted.
Allow User to Disable Active Settings
Select whether or not to permit the group members to temporarily disable the forcible printing
features, such as the Force Watermark, Print Universal Unique ID, and Force Annotation
features, and to allow the machine to process a job.
Note • This feature does not appear for some models. An optional component is required. For more

User Details Setup

Set the information required when carrying out authentication.
Alternative Name for User ID
If required, you can change the indication "UserID" on the [Login] screen that appears when
the <Log In/Out> button on the control panel is pressed to another name such as "User
Name" or "Number". The alias can be set to 1 to 15 single-byte characters.
Note • The name changed is also printed in a report or a list.
Mask User ID (***)
You can set how an entered user ID is shown on the screen. Use this feature to enhance
security as required.
When you select [Show], the characters you enter are echoed on the screen in the normal
way as you enter the user ID. When you select [Hide], the characters you enter is hidden as a
row of asterisks (*****) as you enter the user ID.
Failed Access Log
Set the failure count to detect unauthorized access. An error is logged if authentication fails
the number of times specified here within a predetermined time (10 minutes).
Logout Confirmation Screen
Set whether or not to display a logout confirmation screen every time a user session ends.
User ID for Login
Set whether or not to make the user ID entry field on the user login screen case-sensitive.
When you select [Case Sensitive], authentication is performed using the User ID as
registered (including upper and lower cases). When you select [Non-Case Sensitive],
authentication is performed with case ignored even if the User ID has both upper and lower
cases.
Important • Do not change the setting while a file is stored for the Private Charge Print. Otherwise, you
Save remote accounts in this machine
Set whether or not to save user information used for remote authentication in the machine.
When you select [Enabled] and perform remote authentication, user information is saved in
the machine. The user can be authenticated using the information saved in the machine even
when the remote authentication server is off.
Note • This setting applies only to a user who is authenticated by smart cards.
Guest User
Set whether or not to permit a guest user when [Login to Remote Accounts] is selected. Set
the guest passcode for the guest user.
Important • If permitted, a guest can operate the buttons on the control panel of the machine through a
Use of Smart Card
Set whether or not to use smart card authentication.
Smart Card Link Mode
Set whether or not to require a passcode for smart card authentication.
information, contact our Customer Support Center.
may encounter problems, such as being unable to print. Change the setting after the
machine prints all the files stored.
passcode authentication. Access restriction for each service, however, cannot be specified
for the guest user.
Authentication/Security Settings
5
249