Auto Job Promotion - Fuji Xerox DocuCentre-IV C2260 Administrator's Manual

5 Tools
Offset Stacking (Right Middle Tray)
Offsetting means that each set of copies is delivered to the finisher tray and shifted slightly to
separate it from the previous job. When a set of copies is delivered to the front of the tray, the
next set is delivered to the rear of the tray. Set the offset function for the Right Middle Tray.
Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or [Offset
per Job] is selected, the machine slightly shifts the output position per set or per job (print job)
respectively.
Note
Booklet Offset
When [Offset Stacking (Right Middle Tray)] is set to [Offset per Set], the paper is output to the
tray by being slightly displaced by set. If, however, [Fold & Staple] is selected for booklet
settings, the paper is not output by set.
Note
Extra Center Tray
Allows you to select whether or not to use the Extra Center Tray.
Select from [Not Installed] and [Installed].

Auto Job Promotion

You can select whether or not to allow another job to automatically bypass the current job
5
when the machine is unable to start an operation for any reason, (for example, running out of
paper in a tray when starting copying or printing).
Note
Default Print Paper Size
You can set the paper size, A4 or 8.5 x 11" to print reports and/or lists.
Odd Page 2 Sided
You can specify whether or not to add a blank page when a document containing an odd
number of pages is printed in 2-sided.
Paper Size Settings
You can specify the size of paper to be automatically detected when you use standard sizes
of a document or the machine is set to detect sizes of a document.
You can select from the following tables: [A/B Series (8 × 13")], [A/B Series], [A/B Series (8K/
16K)], [A/B Series (8 × 13/8 × 14")], and [Inch Series].
150
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• Stored documents such as Secure Print and Sample Set documents cannot be used with
the Auto Job Promotion feature.
• When [Enabled] is selected and there is a job bypassed because of paper out, a message
stating the reason of the job promotion appears. The job bypassed can be processed after
you take proper measures by following the instruction of the message. Or, you can cancel
the job by pressing the <Clear All> button. When multiple jobs are bypassed, a screen that
lists the bypassed jobs appears. This screen allows you to display the details screen and to
delete the jobs.