Fuji Xerox DocuCentre-IV C2260 Administrator's Manual page 485

Category
Error Code
C P F S M O
033-749
O
033-750
O
033-751
O
041-310
O O O
041-325
041-326
041-327
041-328
041-334
041-335
041-340
041-341
041-342
041-347
042-323
O O O
042-325
042-330
042-337
045-310
O O O
045-311
045-313
045-321
045-322
045-331
045-332
045-350
045-351
045-352
047-320 O O O
062-277
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
Cause and Remedy
[Cause] The machine will automatically recover and print the
document.
[Remedy] No measure is required.
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power.
Try again. If the error still is not resolved, contact our
Customer Support Center.
O [Cause] An activity report output occurred during the printer lockout
duration. Outputting the activity report was suspended
because the machine was in the Sleep mode.
[Remedy] No measure is required because the machine will output
the report after exiting the Sleep mode.
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power. If
the same message is displayed again, contact our
Customer Support Center.
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power. If
the same message is displayed again, contact our
Customer Support Center.
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power. If
the same message is displayed again, contact our
Customer Support Center.
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power. If
the same message is displayed again, contact our
Customer Support Center.
O [Cause] A communication error occurred between the document
scanning unit and the document feeder.
[Remedy] Contact our Customer Support Center.
Error Code
14
483