Fuji Xerox DocuCentre-IV C2260 Administrator's Manual page 426

Hide thumbs Also See for DocuCentre-IV C2260:
Table of Contents

Advertisement

14 Problem Solving
Error Code
C P F S M O
016-403
016-404
016-405
016-406
016-450
016-453
016-454
016-455
016-456
14
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
424
Category
O [Cause]
[Remedy] Confirm the authentication server and store the root
O [Cause]
[Remedy] Execute the operation again. If the error still is not
O [Cause]
[Remedy] Initialize the certificate.
For more information on initializing certificates, refer to "Delete All
Certificates/Initialize Settings" (P.145).
O [Cause]
[Remedy] Take one of the following measures:
O [Cause]
[Remedy] Change the host name.
Refer to "Host Name" (P.174).
O [Cause]
[Remedy] Check whether the IP address of the DNS server is set
O [Cause]
[Remedy] Confirm the DNS configuration and IP address retrieve
Refer to "Protocol Settings" (P.171).
O [Cause]
[Remedy] Confirm the network cable connection and the IP address
Refer to "Machine Clock/Timers" (P.132).
O [Cause]
[Remedy] Confirm the SNTP server settings.
Refer to "Machine Clock/Timers" (P.132).
Cause and Remedy
The root certificate did not match.
certificate of the server certificate of the authentication
server into the machine.
If you cannot acquire the root certificate of the server
certificate, set [Server Certificate Verification] of [IEEE
802.1x Settings] to [Disabled] on the touch screen.
An internal error occurred.
resolved, contact our Customer Support Center.
An error occurred in the certificate stored in the machine.
An error occurred in the SSL client certificate.
Store an SSL client certificate in the machine to set the
SSL client certificate.
If an SSL client certificate cannot be set on the machine,
select an option other than [EAP-TLS] in [Authentication
Method].
The SMB host name already exists.
Updating of the IPv6 address and host name for the DNS
server failed.
correctly.
Unable to retrieve the IP address from DNS.
setting.
Connection to the SNTP server timed out.
of the SNTP server are correct.
Received a message from the SNTP server stating that
the server is not synchronized with the standard time
source.

Advertisement

Table of Contents
loading

Table of Contents