Cleaning The Machine; Cleaning The Exterior; Cleaning The Interior (Laser Scanners) - Fuji Xerox DocuCentre-IV C2260 Administrator's Manual

Cleaning the Machine

This section describes how to clean the machine such as the machine exterior,
document cover, document feeder, and document glass.
WARNING
When cleaning this product, use the designated cleaning materials exclusive to it.
Other cleaning materials may result in poor performance of the product. Never use
aerosol cleaners, or it may catch fire and cause explosion.
CAUTION
When cleaning this product, always switch off the power and then the main power
inside the body front cover, and unplug the product. Access to a live machine interior
may cause electric shock.

Cleaning the Exterior

The following describes how to clean the exterior of the machine.
Important • Do not use benzene, paint thinner, or other volatile liquids or spray insect repellent on the
• Cleaning the machine with an excessive amount of water may cause the machine to
1
Wipe the exterior with a firmly wrung soft
cloth moistened with water.
Important • Do not use cleaning agents other than
Note • If you cannot remove the dirt easily,
2
Wipe off any excess water with a soft cloth.

Cleaning the Interior (Laser Scanners)

The following describes how to clean the interior (laser scanners or Raster Output
Scanner (ROS)) of the machine.
Normally, clean the laser scanners when you replace the waste toner container.
However, if you have image quality problems such as white or colored stripes
appearing on copied or printed outputs, clean the laser scanners.
Important • Clean the laser scanners periodically when you replace the waste toner container.
machine as they might discolor, deform, or crack covers.
malfunction or damage documents during copying.
water or neutral detergent.
gently wipe the machine with a soft cloth
moistened with a small amount of neutral
detergent.

Cleaning the Machine

81
3