Fuji Xerox DocuCentre-IV C2260 Administrator's Manual page 488

Hide thumbs Also See for DocuCentre-IV C2260:
Table of Contents

Advertisement

14 Problem Solving
Error Code
C P F S M O
091-927
091-928
091-929
092-312
092-313
092-314
092-315
093-314
093-315
093-316
093-317
093-426
093-427
093-428
093-429
112-700
14
116-210
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
486
Category
O [Cause]
[Remedy] Make sure that the drum cartridge [R4] is installed. When
O [Cause]
[Remedy] Make sure that the drum cartridge [R3] is installed. When
O [Cause]
[Remedy] Make sure that the drum cartridge [R2] is installed. When
O [Cause]
[Remedy] Switch off the machine power, make sure that the touch
O [Cause]
[Remedy] Pull out the toner cartridge [K] (black), and then insert the
O [Cause]
[Remedy] Pull out the toner cartridge [Y] (yellow), and then insert the
O [Cause]
[Remedy] Pull out the toner cartridge [M] (magenta), and then insert
O [Cause]
[Remedy] Pull out the toner cartridge [C] (cyan), and then insert the
O [Cause]
[Remedy] Empty the punch waste container.
For more information on how to empty the punch waste container, refer to
"Emptying Punch Waste Container (for Finisher-B1)" (P.68).
O
O
O [Cause]
[Remedy] Switch off the machine power, make sure that the touch
Cause and Remedy
The drum cartridge [R4] is not installed, or a contact failure
occurred in the drum cartridge [R4].
the drum cartridge is installed, pull out the drum cartridge,
and then insert it again.
The drum cartridge [R3] is not installed, or a contact failure
occurred in the drum cartridge [R3].
the drum cartridge is installed, pull out the drum cartridge,
and then insert it again.
The drum cartridge [R2] is not installed, or a contact failure
occurred in the drum cartridge [R2].
the drum cartridge is installed, pull out the drum cartridge,
and then insert it again.
An error occurred.
screen is blank, and then switch on the machine power. If
the same message is displayed again, contact our
Customer Support Center.
An error occurred in the toner cartridge [K] (black).
cartridge again.
An error occurred in the toner cartridge [Y] (yellow).
cartridge again.
An error occurred in the toner cartridge [M] (magenta).
the cartridge again.
An error occurred in the toner cartridge [C] (cyan).
cartridge again.
The finisher's punch waste container is full.
An error occurred in the USB memory device or media
reader.
screen is blank, and then switch on the machine power. If
the error still is not resolved, contact our Customer
Support Center.

Advertisement

Table of Contents
loading

Table of Contents