Image Quality Trouble - Fuji Xerox DocuCentre-IV C2260 Administrator's Manual

14 Problem Solving

Image Quality Trouble

If the image quality of printed documents is poor, identify the symptom in the following
table to perform the remedy.
If image quality does not improve even after performing the remedy, contact our
Customer Support Center.
The copy is dirty. Is the document glass or the
The copy has
black lines.
The copy is too
dark.
The copy is too
light.
The copy is
slightly
misaligned.
14
380
Symptom Cause
document cover dirty?
Is the document a
transparent type such as a
transparency film?
Is the document colored,
rough, or a blueprint?
Is the document glossy
printing paper?
Is the document glass on
the document feeder dirty?
Is the copy density set to
[Darken]?
Is the document faint?
Is the copy density set to
[Lighten]?
Are the paper edges aligned
and the leading edge
adjusted to the tray
corners?
Remedy
Clean the document glass and the
document cover.
Refer to "Cleaning the Document Cover and
Document Glass" (P.83).
If the document is transparent, dirt on the
document cover will be copied. Place a
white sheet of paper on top of the
document when copying.
Adjust the copy density or image quality.
Refer to "3 Copy" > "Image Quality" in the
User Guide.
Glossy printing paper easily sticks to the
document glass, and shadows are
sometimes copied, soiling the image.
Place a transparency film under the
document when copying.
Clean the document glass.
Refer to "Cleaning the Film and Constant
Velocity Transport Glass" (P.84).
Adjust the copy density.
Refer to "3 Copy" > "Image Quality" in the
User Guide.
Align the paper edges, adjust them to the
tray's top corners, and reload the paper.
Refer to "Loading Paper" (P.42).