Fuji Xerox DocuCentre-IV C2260 Administrator's Manual page 432

14 Problem Solving
Error Code
C P F S M O
016-557
016-558
016-559
016-560
016-563
016-564
016-569
016-570
016-571
14
016-572
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
430
Category
O [Cause]
[Remedy] Check the Authentication Agent.
For more information on the process, refer to the manual for the
Authentication Agent.
O [Cause]
[Remedy] Contact our Customer Support Center.
O [Cause]
[Remedy] Confirm the settings for essential system data.
O [Cause]
[Remedy] Check whether the network cable is connected, and
O [Cause]
[Remedy] Select Standard for the image quality. If the error still is not
O [Cause]
[Remedy] Confirm the login name and password to access the
O [Cause]
[Remedy] Contact our Customer Support Center.
O [Cause]
[Remedy] Increase the size of memory for job tickets in [Job Ticket
For more information on [Job Ticket Memory], refer to "Allocate Memory"
(P.186).
O [Cause]
[Remedy] Check whether there the print settings are correct, correct
O [Cause]
[Remedy] Check whether the paper specified for printing can be
Cause and Remedy
Authentication Agent internal error occurred.
The machine received an unknown error from the
Authentication Agent.
A remote download parameter error occurred. An invalid
value is set for essential system data.
A communications error occurred between the machine
and the Authentication Agent.
confirm the settings of the Authentication Agent. Also, print
a Configuration Report, and if the DNS address of the
server is set to "Server Name / IP Address" for
"Authentication Agent", check whether DNS is enabled.
The job cannot continue because there is insufficient
memory for the Image Extension Kit.
resolved, contact our Customer Support Center.
Failed to authenticate the Remote Download server.
Remote Download server. If the error still is not resolved,
contact the Customer Support Center.
Authentication Agent error
Unable to print because of insufficient memory for job
tickets.
Memory] of [Print Service Settings] in [Tools], switch off
the machine power, make sure that the touch screen is
blank, and then switch on the machine power. And then
start the print job again.
Unable to print because the content of the job ticket is
incorrect.
the print settings, and then send the print job again.
Unable to print because the paper attribute specified for
the job ticket is for paper (paper size, paper quality, or
paper color) that cannot be used on this machine.
used by this machine.